Del 330 i serien Communications in Computer and Information Science

Trends in Intelligent Robotics, Automation, and Manufacturing

First International Conference, IRAM 2012, Kuala Lumpur, Malaysia, November 28-30, 2012, Proceedings

Häftad, Engelska, 2012

AvS.G. Poonambalam,Jussi Parkkinen,Kuppan Chetty Ramanathan

749 kr

Beställningsvara. Skickas inom 10-15 vardagar. Fri frakt för medlemmar vid köp för minst 249 kr.

This book constitutes the proceedings of the First International Conference on Intelligent Robotics and Manufacturing, IRAM 2012, held in Kuala Lumpur, Malaysia, in November 2012.The 64 revised full papers included in this volume were carefully reviewed and selected from 102 initial submissions. The papers are organized in topical sections named: mobile robots, intelligent autonomous systems, robot vision and robust, autonomous agents, micro, meso and nano-scale automation and assembly, flexible manufacturing systems, CIM and micro-machining, and fabrication techniques.

Produktinformation

Utgivningsdatum2012-10-28
Mått155 x 235 x 30 mm
Vikt814 g
FormatHäftad
SpråkEngelska
SerieCommunications in Computer and Information Science
Antal sidor528
Upplaga2012
FörlagSpringer-Verlag Berlin and Heidelberg GmbH & Co. KG
ISBN9783642351969

Tillhör följande kategorier

Tillämpad datateknik inom Data och IT
Systemvetenskap och AI inom Data och IT
Programmeringsböcker inom Data och IT
Artificiell intelligens inom Data och IT

Intelligent Robotics.- A Heuristic Approach towards Path Planning and Obstacle Avoidance Control of Planar Manipulator.- A Nonlinear Disturbance Observer Based Adaptive Control Scheme for an Underwater Manipulator.- Obstacle Avoidance Using Multi-Point Potential Field Approach for an Underactuated Flat-Fish Type AUV in Dynamic Environment.- Synchronizing Multi-robots in Switching between Different Formations Tasks While Tracking a Line.- Reconfigurable Stewart Platform for Vibration Isolation.- Posture Estimation Strategy for Multi Robot System Based on Visual Perception and Optical Pointer.- Fuzzy Membership Scaling Mechanisms for Mobile Robot Behaviours.- Adaptive Speed Control for Autonomous Mobile Robot Using Fuzzy Logic Controller.- A Braitenberg Approach to Mobile Robot Navigation in Unknown Environments.- SCARA Robot: Modeled, Simulated, and Virtual-Reality Verified.- Real Time Mobile Robot Navigation of Virtually Created Environments.- GUI Teaching Pendant Development for a 6 Axis Articulated Robot.- UTHM HAND: Kinematics behind the Dexterous Anthropomorphic Robotic Hand.- An Efficient Grid Based Navigation of Wheeled Mobile Robots Based on Visual Perception.- Bond Graph Based Unified Modeling Framework for Aerial Service Robots.- Waypoint Navigated Unmanned Aerial Vehicle Autopilot System.- A Study on Vehicle Lateral Motion Control Using DGPS/RTK.- Van Der Pol Central Pattern Generator (VDP-CPG) Model for Quadruped Robot.- Twin-Hull URRG Blimp Control for Low Altitude Surveillance Application.- Drag Analysis of URRG Vertical Profiler (UVP) Using Integration of Computational Fluid Dynamics (CFD) and Design of Experiments (DOE).- Biologically Inspired Architecture for Spatiotemporal Learning of Mobile Robots.- Analysis of Electrocardiogram (ECG) Signals for Human Emotional Stress Classification.- Kinematics and Kinetics Studies on Upper Extremity during Walking Frame Ambulation.- Investigation on Upper Limb’s Muscle Utilizing EMG Signal.- Genetic Algorithmand Bayesian Linear Discriminant Analysis Based Channel Selection Method for P300 BCI.- EMG Signal Based Human Stress Level Classification Using Wavelet Packet Transform.- Controlling of a Biped System Using SSC Visual Sequencer.- Cordless Cart Follower for Wheelchair User.- A Brief Introduction to Intrusion Detection System.- Automation.- Experimental Investigations on Piezoelectric Based Prototype Actuator.-Development of Mechanical Actuator for Deep-Hole Measurement System.- D-Fuzzy Logic Controller Design for Position Control of Intelligent Pneumatic Actuator System.- Design of an Acceleration Sensor Embedded RFID (SE-RFID) Tag for Highway Guardrail Monitoring.- From Cloud Computing to Cloud Manufacturing Excution Assembly System.- Transient Analysis of Structronics Shell.- Free Vibration Analysis of Structronics Shell.- Improvement of Actuation Speed of Hydraulic Cylinders: Using Novel Flow Control Valve System.- Optimum Speed Using Evolutionary Algorithms for Induction Motor Drive.- DICOM Image Authentication and Encryption Based on RSA and AES Algorithms.- Rain Removal in Image Sequence Using Sparse Coding .- A Decentralized Resource Monitoring System Using Structural, Context and Process Information.- Manufacturing.- Influence of Substrate Temperature, Pressure and Grit Size on Synthesis of SiC Thin Film by Pulsed Laser Deposition Technique.- Influence of Sb Coated Substrates in Development of Vertical and Random Oriented ZnO Nanostructures for UV LED Application Using Nano Particle Assisted Pulsed Laser Deposition.- Intelligent Design of a Flexible Cell Layout with Maximum Stability in a Stochastic Dynamic Situation.- A Web-Based Manufacturing Execution System for Industry Services and Supply Chain Management: Application to Real-Time Process Virtual Monitoring.- Implementation of Multi Objective Fuzzy Integer Programming Technique by Using Suppy Chain Management.- Integrated Layout Design Approach for Cellular Manufacturing System.- Hot Corrosion Studieson Gas Tungsten Arc Welded AISI 304 and AISI 4140 Dissimilar Joints.- A Comparative Study of Oxidation and Hot Corrosion of Electron.- Beam Welded Low Alloy Steel and Stainless Steel in Different Corrosive Environments.- Hot Corrosion Behavior of Dissimilar GTA Welded Monel 400 and AISI 304.- Microstructure and Mechanical Behavior of Friction Stir Welded Copper.- Self-healing Ability of Structural Ceramics – A Review.- Effect of Tool Nose Profile Tolerance on Surface Roughness in Precision Turning.- Effects of Cutting and Vibration Parameters on Transient Cutting Force in Elliptical Vibration Cutting.- Supplier Selection: Reliability Based Total Cost of Ownership Approach Using Cuckoo Search.- Enhancing Internal Quality of the Software Using Intelligence Code Evaluator.- Enhancing Quality Using FEAROM Model for Finalizing a Casting Product Methods Design in Preproduction Trials.- Modeling and Analysis on Deformation Behavior for AA 6061 through Equal Channel Angular Pressing Die.

Mer från samma serie

Software Technologies

Leszek Maciaszek, Marten van Sinderen, Francisco José Dominguez-Mayo, Hans-Georg Fill

Häftad, 2026

989 kr

Advances in Computing

Wilson J. Sarmiento, Eduard L. Sierra-Ballén

Häftad, 2026

1 619 kr

Del 2464

Geomatics for Green and Digital Transition

Enrico Borgogno-Mondino, Paola Zamperlin

Häftad, 2025

1 229 kr

Del 2648

Geographical Information Systems

Miguel Felix Mata-Rivera, Roberto Zagal-Flores, Daniela Elisabeth Ballari, Jose Antonio Leon Borges

Häftad, 2025

1 099 kr

Ramesh C. Bansal, Margarita N. Favorskaya, Shahbaz Ahmed Siddiqui, Pooja Jain, Ankush Tandon - Advanced Computing Techniques in Engineering and Technology, Häftad

Del 2000

Advanced Computing Techniques in Engineering and Technology

Ramesh C. Bansal, Margarita N. Favorskaya, Shahbaz Ahmed Siddiqui, Pooja Jain, Ankush Tandon

Häftad, 2024

1 779 kr

András Benczúr, Bernhard Thalheim, Tomáš Horváth, Silvia Chiusano, Tania Cerquitelli, Csaba Sidló, Peter Z. Revesz - New Trends in Databases and Information Systems, Häftad

Del 909

New Trends in Databases and Information Systems

András Benczúr, Bernhard Thalheim, Tomáš Horváth, Silvia Chiusano, Tania Cerquitelli, Csaba Sidló, Peter Z. Revesz

Häftad, 2018

749 kr

Del 927

Semantic Web Challenges

Davide Buscaldi, Aldo Gangemi, Diego Reforgiato Recupero

Häftad, 2018

749 kr

Del 915

Applied Computer Sciences in Engineering

Juan Carlos Figueroa-García, Eduyn Ramiro López-Santana, José Ignacio Rodriguez-Molano

Häftad, 2018

709 kr

Del 916

Applied Computer Sciences in Engineering

Juan Carlos Figueroa-García, Juan G. Villegas, Juan Rafael Orozco-Arroyave, Pablo Andres Maya Duque

Häftad, 2018

729 kr

Del 934

Artificial Intelligence

Sergei O. Kuznetsov, Gennady S. Osipov, Vadim L. Stefanuk

Häftad, 2018

749 kr

Du kanske också är intresserad av

Image Analysis

Heikki Kalviainen, Jussi Parkkinen, Arto Kaarna

Häftad, 2005

2 229 kr

Nyhet

Allt det blå på himlen

Mélissa Da Costa

Pocket, 2026

79 kr129 kr

Mari Jungstedt - När göken tystnar, Inbunden

Nyhet

Del 1

När göken tystnar

Mari Jungstedt

Inbunden, 2026

319 kr

Nyhet

Del 3

Kärleken

Pascal Engman

Inbunden, 2026

269 kr299 kr

Nyhet

Del 7

Fördrivaren

Viveca Sten

Inbunden, 2026

289 kr319 kr

Nyhet

Threshing Day (Limited Deluxe Edition)

Rebecca Yarros

Inbunden, 2026

339 kr

Nyhet

Del 11

Medusa

Lars Kepler

Inbunden, 2026

289 kr319 kr

Katarina Wennstam - Moder blod, Inbunden

Nyhet

Del 4

Moder blod

Katarina Wennstam

Inbunden, 2026

269 kr299 kr

Ruth Kvarnström-Jones - Systrarna på Sophiahemmet, Inbunden

Nyhet

Del 3

Systrarna på Sophiahemmet

Ruth Kvarnström-Jones

Inbunden, 2026

299 kr329 kr

Sarah J. Maas - A Court of Splintered Harmony, Häftad

Nyhet

Del 6

A Court of Splintered Harmony

Sarah J. Maas

Häftad, 2026

259 kr

Del 330 i serien Communications in Computer and Information Science

Trends in Intelligent Robotics, Automation, and Manufacturing

First International Conference, IRAM 2012, Kuala Lumpur, Malaysia, November 28-30, 2012, Proceedings

Häftad, Engelska, 2012

AvS.G. Poonambalam,Jussi Parkkinen,Kuppan Chetty Ramanathan

749 kr

Beställningsvara. Skickas inom 10-15 vardagar. Fri frakt för medlemmar vid köp för minst 249 kr.

Produktinformation

Utgivningsdatum2012-10-28
Mått155 x 235 x 30 mm
Vikt814 g
FormatHäftad
SpråkEngelska
SerieCommunications in Computer and Information Science
Antal sidor528
Upplaga2012
FörlagSpringer-Verlag Berlin and Heidelberg GmbH & Co. KG
ISBN9783642351969

Tillhör följande kategorier

Tillämpad datateknik inom Data och IT
Systemvetenskap och AI inom Data och IT
Programmeringsböcker inom Data och IT
Artificiell intelligens inom Data och IT

Intelligent Robotics.- A Heuristic Approach towards Path Planning and Obstacle Avoidance Control of Planar Manipulator.- A Nonlinear Disturbance Observer Based Adaptive Control Scheme for an Underwater Manipulator.- Obstacle Avoidance Using Multi-Point Potential Field Approach for an Underactuated Flat-Fish Type AUV in Dynamic Environment.- Synchronizing Multi-robots in Switching between Different Formations Tasks While Tracking a Line.- Reconfigurable Stewart Platform for Vibration Isolation.- Posture Estimation Strategy for Multi Robot System Based on Visual Perception and Optical Pointer.- Fuzzy Membership Scaling Mechanisms for Mobile Robot Behaviours.- Adaptive Speed Control for Autonomous Mobile Robot Using Fuzzy Logic Controller.- A Braitenberg Approach to Mobile Robot Navigation in Unknown Environments.- SCARA Robot: Modeled, Simulated, and Virtual-Reality Verified.- Real Time Mobile Robot Navigation of Virtually Created Environments.- GUI Teaching Pendant Development for a 6 Axis Articulated Robot.- UTHM HAND: Kinematics behind the Dexterous Anthropomorphic Robotic Hand.- An Efficient Grid Based Navigation of Wheeled Mobile Robots Based on Visual Perception.- Bond Graph Based Unified Modeling Framework for Aerial Service Robots.- Waypoint Navigated Unmanned Aerial Vehicle Autopilot System.- A Study on Vehicle Lateral Motion Control Using DGPS/RTK.- Van Der Pol Central Pattern Generator (VDP-CPG) Model for Quadruped Robot.- Twin-Hull URRG Blimp Control for Low Altitude Surveillance Application.- Drag Analysis of URRG Vertical Profiler (UVP) Using Integration of Computational Fluid Dynamics (CFD) and Design of Experiments (DOE).- Biologically Inspired Architecture for Spatiotemporal Learning of Mobile Robots.- Analysis of Electrocardiogram (ECG) Signals for Human Emotional Stress Classification.- Kinematics and Kinetics Studies on Upper Extremity during Walking Frame Ambulation.- Investigation on Upper Limb’s Muscle Utilizing EMG Signal.- Genetic Algorithmand Bayesian Linear Discriminant Analysis Based Channel Selection Method for P300 BCI.- EMG Signal Based Human Stress Level Classification Using Wavelet Packet Transform.- Controlling of a Biped System Using SSC Visual Sequencer.- Cordless Cart Follower for Wheelchair User.- A Brief Introduction to Intrusion Detection System.- Automation.- Experimental Investigations on Piezoelectric Based Prototype Actuator.-Development of Mechanical Actuator for Deep-Hole Measurement System.- D-Fuzzy Logic Controller Design for Position Control of Intelligent Pneumatic Actuator System.- Design of an Acceleration Sensor Embedded RFID (SE-RFID) Tag for Highway Guardrail Monitoring.- From Cloud Computing to Cloud Manufacturing Excution Assembly System.- Transient Analysis of Structronics Shell.- Free Vibration Analysis of Structronics Shell.- Improvement of Actuation Speed of Hydraulic Cylinders: Using Novel Flow Control Valve System.- Optimum Speed Using Evolutionary Algorithms for Induction Motor Drive.- DICOM Image Authentication and Encryption Based on RSA and AES Algorithms.- Rain Removal in Image Sequence Using Sparse Coding .- A Decentralized Resource Monitoring System Using Structural, Context and Process Information.- Manufacturing.- Influence of Substrate Temperature, Pressure and Grit Size on Synthesis of SiC Thin Film by Pulsed Laser Deposition Technique.- Influence of Sb Coated Substrates in Development of Vertical and Random Oriented ZnO Nanostructures for UV LED Application Using Nano Particle Assisted Pulsed Laser Deposition.- Intelligent Design of a Flexible Cell Layout with Maximum Stability in a Stochastic Dynamic Situation.- A Web-Based Manufacturing Execution System for Industry Services and Supply Chain Management: Application to Real-Time Process Virtual Monitoring.- Implementation of Multi Objective Fuzzy Integer Programming Technique by Using Suppy Chain Management.- Integrated Layout Design Approach for Cellular Manufacturing System.- Hot Corrosion Studieson Gas Tungsten Arc Welded AISI 304 and AISI 4140 Dissimilar Joints.- A Comparative Study of Oxidation and Hot Corrosion of Electron.- Beam Welded Low Alloy Steel and Stainless Steel in Different Corrosive Environments.- Hot Corrosion Behavior of Dissimilar GTA Welded Monel 400 and AISI 304.- Microstructure and Mechanical Behavior of Friction Stir Welded Copper.- Self-healing Ability of Structural Ceramics – A Review.- Effect of Tool Nose Profile Tolerance on Surface Roughness in Precision Turning.- Effects of Cutting and Vibration Parameters on Transient Cutting Force in Elliptical Vibration Cutting.- Supplier Selection: Reliability Based Total Cost of Ownership Approach Using Cuckoo Search.- Enhancing Internal Quality of the Software Using Intelligence Code Evaluator.- Enhancing Quality Using FEAROM Model for Finalizing a Casting Product Methods Design in Preproduction Trials.- Modeling and Analysis on Deformation Behavior for AA 6061 through Equal Channel Angular Pressing Die.