Protective Systems for High Temperature Applications EFC 57

From Theory to Industrial Implementation

Häftad, Engelska, 2017

Av M. Schutze

1 379 kr

Beställningsvara. Skickas inom 10-15 vardagar

Fri frakt för medlemmar vid köp för minst 249 kr.

Finns i fler format (1)

Inbunden

4 549 kr

Skickas inom 7-10 vardagar

This book is a review of corrosion and thermal protection topics associated with coatings applied in high temperature applications, namely catalytic converters, combustion and steam environments, and gas turbines. Information on corrosion influencing mechanisms and their impact are reviewed.

Produktinformation

Utgivningsdatum2017-06-28
Mått174 x 246 x 28 mm
Vikt800 g
FormatHäftad
SpråkEngelska
SerieEuropean Federation of Corrosion Publications
Antal sidor432
FörlagTaylor & Francis Ltd
ISBN9781138116368

Tillhör följande kategorier

Maskinteknik och material inom Naturvetenskap och teknik

Section 1: Aggressive Combustion Environments 1. Influence of novel cycle concepts on the high temperature corrosion of power plants 2. Corrosion behaviour of boiler steels, coatings and welds in flue gas environment 3. Corrosion of alloys and their diffusion aluminide coatings by KCI:K2SO4 deposits at 650 °C in air 4. Oxide scale formation on Al containing Ni–Cr-based high-temperature alloys during application as flame tube material in recirculation oil burners 5. Development of thermally-sprayed layers for high-temperature areas in waste incineration plants Section 2: Steam Environments 6. High velocity oxy-fuel (HVOF) coatings for steam oxidation protection 7. Identification of degradation mechanisms in coatings for supercritical steam applications 8. Thermogravimetry-mass spectrometry studies in coating design for supercritical steam turbines Section 3: Catalytic Converters 9. Void formation and filling under alumina scales formed on Fe–20Cr–5Al-based alloys and coatings, oxidised at temperatures up to 1200 °C 10. Influence of a TiO2 surface treatment on the growth and adhesion of alumina scales on FeCrAl alloys 11. A new austenitic alumina forming alloy: Aluminium-coated FeNi32Cr20 Section 4: Gas Turbines – Oxidation and Corrosion Protection 12. Effectiveness of platinum and iridium in improving the resistance of Ni-Al to thermal cycling in air-steam mixtures 13. Effect of manufacturing-related parameters on oxidation properties of MCrAlY bond coats 14. Effect of creep-deformation on oxidation behaviour of nickel-based alloy with a rhenium-based diffusion barrier coating 15. Hot corrosion of coated and uncoated single crystal gas turbine materials 16. Oxidation and alkali sulphate-induced corrosion of aluminide diffusion coatings with and without platinum 17. Improving the oxidation resistance of c-titanium aluminides by halogen treatment Section 5: Gas Turbines – Thermal Protection 18. Effect of surface preparation on the durability of NiCoCrAlY coatings for oxidation protection and bond coats for thermal barrier coatings 19. Parameters affecting the growth rate of thermally grown oxides and the lifetime of thermal barrier coating systems with MCrAlY bond coats 20. Influence of bond coat surface roughness on chemical failure and delamination in thermal barrier coating systems 21. Investigation on the oxidation behaviour of gamma titanium aluminides coated with thermal barrier coatings 22. Role of bond coat depletion of aluminium on the lifetime of air plasma sprayed thermal barrier coatings under oxidising conditions 23. A software tool for lifetime prediction of thermal barrier coating systems 24. Waste incineration corrosion processes: Oxidation mechanisms by electrochemical impedance spectroscopy 25. Behaviour of NiAl air plasma sprayed coatings in chlorine-containing atmospheres 26. Parameters governing the reduction of oxide layers on Inconel 617 in an impure VHTR He atmosphere 27. Protective coatings for very high-temperature reactor applications 28. Oxidation of electrodeposited Cr-C at temperatures between 400 °C and 900 °C in air 29. Experimental analysis and computer-based simulation of nitridation of Ni-Base alloys – the effect of a pre-oxidation treatment 30. Influence of alloy compositions on the halogen effect in TiAl alloys 31. Modelling of the long-term stability of the fluorine effect in TiAl oxidation 32. High-temperature oxidation of Ti3Al0.7Si0.3C2 in air at 900 °C and 1000 °C