Processing, Properties, and Design of Advanced Ceramics and Composites II

Narottam P. Bansal is the editor of Processing, Properties, and Design of Advanced Ceramics and Composites II, published by Wiley.Ricardo H. R. Castro is the editor of Processing, Properties, and Design of Advanced Ceramics and Composites II, published by Wiley.Michael Jenkins is the editor of Processing, Properties, and Design of Advanced Ceramics and Composites II, published by Wiley.Amit Bandyopadhyay is the editor of Processing, Properties, and Design of Advanced Ceramics and Composites II, published by Wiley.Susmita Bose is the editor of Processing, Properties, and Design of Advanced Ceramics and Composites II, published by Wiley.Amar S. Bhalla is the editor of Processing, Properties, and Design of Advanced Ceramics and Composites II, published by Wiley.J. P. Singh is the editor of Processing, Properties, and Design of Advanced Ceramics and Composites II, published by Wiley.Morsi M. Mahmoud is the editor of Processing, Properties, and Design of Advanced Ceramics and Composites II, published by Wiley.Gary Pickrell is the editor of Processing, Properties, and Design of Advanced Ceramics and Composites II, published by Wiley.Sylvia Johnson is the editor of Processing, Properties, and Design of Advanced Ceramics and Composites II, published by Wiley.

• Preface xiADVANCES IN COMPOSITESThe Effect of Paste Water Content on the Green Microstructure of Extruded Titanium Dioxide 3Mustafa Kanaan Alazzawi and Richard A. HaberCompaction Plasticity of Spray Dried Alumina Granules to Form Microstructural Uniformity and Green Strength 15I. P. Maher and R. A. HaberA Model for the Numerical Simulation of Liquid Silicon Infiltration into Porous Carbon/Carbon Preforms 23Khurram Iqbal, Sudhanshu Dwivedi, and Stevens CadetForeign Object Damage in a SiC Fibrous Composite 33Nesredin Kedir, David Faucett, Luis Sanchez, and Sung R. ChoiINTERNATIONAL STANDARDS FOR PROPERTIES AND PERFORMANCE OF ADVANCED CERAMICSASTM Subcommittee C28.01 Mechanical Properties and Reliability 47Michael G. JenkinsASTM Committee C28: International Standards for Properties and Performance of Advanced Ceramics-Three Decades of High-Quality, Technically-Rigorous Normalization 59Michael G. Jenkins and Jonathan A. SalemASTM Subcommittee C28.07 Ceramic Matrix Composites 81Michael G. Jenkins and Andrew WereszczakActivities in ISO/TC206 Fine Ceramics—A Quarter Century of 95ProgressShuji SakaguchiSINTERING AND RELATED POWDER PROCESSINGThe Usage of Heat Explosion to Synthesize Intermetallic Compounds and Alloys 111Karina Belokon and Yuriy BelokonStructural Characterization of Carbon-Based Materials Obtained by Spark Plasma Sintering of Non-Graphitic Carbon with Nickel and Iron as Catalysts and Space Holders 117A. V. Ukhina, B. B. Bokhonov, D. V. Dudina, K. Yubuta, and H. KatoOn the Effect of Electric Field during Spark Plasma Sintering—A “Faraday Cage” Approach 127Anil Prasad, Somi Doja, and Lukas BichlerEnhancement of Diffusion Bonding of Silver Graphite to Copper by Severe Plastic Deformation 137Daudi R. WaryobaSURFACE PROPERTIES OF BIOMATERIALSHydroxyapatite Precipitation on Ti-6Al-4V and Ti-6Al-7Nb Alloys: Effect of Surface Conditions 153Mahmoud Abdel-salam, Waleed Khalifa, and Shimaa El-HadadMicrostructure and Mechanical Properties of Heat Treated Ti-6Al-7Nb Alloy 169Ahmed Fityan, Shimaa El-Hadad, and Waleed KhalifaSurface Modification of Titanium Foams Produced by Freeze-Casting 179Silvia Briseno Murguia, Joshua Barclay, Samir M. Aouadi, and Marcus L. YoungThe Effect of Plastic Deformation on the Cell Viability and Adhesion Behavior in Metallic Implant Materials 187INNOVATIVE PROCESSINGInfluence of Hot-Pressing Time on Phase Evolution of SHS Obtained Ti2AlC Active Precursor Powder 199L. Chlubny, J. Lis, P. Borowiak, and K. ChabiorIncreasing the Silicon Carbide Content in Laser Sintered Reaction Bonded Silicon Carbide 207Sebastian Meyers, Lien De Leersnijder, Jef Vleugels, and Jean-Pierre KruthChallenges in Spark Plasma Sintering of Cerium (IV) Oxide 217Anil Prasad, Linu Malakkal, Lukas Bichler, and Jerzy SzpunarDIELECTRIC MATERIALS AND ELECTRONIC DEVICESStudy of the Dielectric Response of Rare-Earth Modified PZT Ferroelectric Ceramics—An Approach to the Diffuse Phase Transition 227S. P. Hessel, A. C. Silva, R. Guo, A. S. Bhalla, and J. D. S. GuerraInfluence of Processing and Microstructure on Dielectric Properties of Calcium Copper Titanate Ceramics 237Disna P. Samarakoon, Nirmal Govindaraju, and Raj N. SinghEffect of A-Site Doping by La, Ba, and Ca on Thermoelectric Properties of Sr2FeTiO6 Double Perovskites 245P. Roy and T. MaitiPROCESSING AND PERFORMANCE OF MATERIALS USING MICROWAVES, ELECTRIC, AND MAGNETIC FIELDSChange of Energy Transfer Medium from High Temperature Gas to Microwave 255Kazuhiro Nagata and Motoyasu SatoEffect of Laser Shock Peening (LSP) on AISI L6 Hot Work Tool Steel 267Sachin Patil, Valmik Bhavar, Prakash Kattire, P. P. Date, and Rajkumar SinghComprehending Microwave-Enhanced Isothermal Process Kinetics in Ceramic Processing 275Boon WongTHERMAL PROTECTION MATERIALS AND SYSTEMSCharacterization of Deposits Found on Carrier Panel Tiles Recovered from the Space Shuttle Columbia 293Brenda R. Arellano, Stephen W. Stafford, Darren M. Cone, and Mayra ContrerasUnlocking the Thermal Protection Potential of Ceramic Matrix Composites 305R. CookDetermination of the Mechanical Properties of the Lightweight Ablative Material ZURAM 311Thomas Reimer, Christian Zuber, Jakob Rieser, and Thomas RothermelADVANCED MATERIALS FOR HARSH ENVIRONMENTSIn Situ TEM Observations of Corrosion in Nanocrystalline Fe Thin Films 329David Gross, Josh Kacher, Jordan Key, Khalid Hattar, and Ian M. RobertsonRemoval and Separation of Metal Ions from the Chromium Plating Wastewater using Persimmon Gel and Immobilized Microbe 339Takehiko Tsuruta and Tomonobu HatanoZIRCONIA BASED MATERIALSMicrostructural Evolution and Tribocorrosion Performance of Novel Laser Clad Ti-Ni-ZrO2 Composite Coatings in 3.5% NaCl Solution 355Babatunde A. Obadele, Oladeji O. Ige, and Peter A. OlubambiThe Evolution of the Structure and the Transport Properties of ZrO2-Y2O3, ZrO2-Sc2O3 and ZrO2-Y2O3-Sc2O3 Crystals, Obtained by Skull Melting Technique 365M. A. Borik, S. I. Bredikhin, V. T. Bublik, A. V. Kulebyakin, I. E. Kuritsyna, E. E. Lomonova, F. O. Milovich, V. A. Myzina, V. V. Osiko, P. A. Ryabochkina, S. V. Seryakov, and N. Yu. TabachkovaCONTROLLED SYNTHESIS, PROCESSING, AND APPLICATIONS OF STRUCTURAL AND FUNCTIONAL NANOMATERIALSPreparation and Characterization of Poly (Meta-Phenylene Isophthalamide) Microporous Membranes by Coaxial Electrospinning 381Weiwang Chen and Wenguo WengMolecular Dynamics Simulations of Glancing Angle Deposition of Polymer Nanoparticles 391David A. Kessler and Marriner H. MerrillCERAMIC OPTICAL MATERIALSHighly Translucent, High Strength Zirconia Ceramics with Nano-Sized Tetragonal Domain 407Isao Yamashita, Yuya Machida, and Shouichi YamauchiMULTIFUNCTIONAL OXIDESPhysical Property Relationships in Spinel Ferrite Thin Films Developed Using the Spin-Spray Deposition Method 417N. M. Ray, W. T. Petuskey, H. Lorzel, and M. R. McCartney