Polymer Matrix Composites and Technology

Häftad, Engelska, 2016

AvRu-Min Wang,Shui-Rong Zheng,Yujun George Zheng,University of Georgia) Zheng, Yujun George (Associate Professor, Department of Pharmaceutical and Biomedical Sciences,W. Rumin,Z. Shuirong

2 609 kr

Beställningsvara. Skickas inom 7-10 vardagar. Fri frakt för medlemmar vid köp för minst 249 kr.

Given such properties as low density and high strength, polymer matrix composites have become a widely used material in the aerospace and other industries. Polymer matrix composites and technology provides a helpful overview of these materials, their processing and performance.After an introductory chapter, part one reviews the main reinforcement and matrix materials used as well as the nature of the interface between them. Part two discusses forming and molding technologies for polymer matrix composites. The final part of the book covers key aspects of performance, including tensile, compression, shear and bending properties as well as impact, fatigue and creep behaviour.Polymer matrix composites and technology provides both students and those in industry with a valuable introduction to and overview of this important class of materials.

Produktinformation

Utgivningsdatum2016-08-19
Vikt790 g
FormatHäftad
SpråkEngelska
SerieWoodhead Publishing Series in Composites Science and Engineering
Antal sidor568
FörlagElsevier Science & Technology
ISBN9780081017241

Tillhör följande kategorier

Maskinteknik och material inom Naturvetenskap och teknik

Author contact detailsPrefaceChapter 1: Introduction to polymer matrix composites1.1 Introduction1.2 The definition of composite materials1.3 Naming and classification of composite materials1.4 Molding methods of composite materials1.5 Characteristics of composite materials1.6 Application of composite materials1.7 The progress of composite materials1.8 The important role of composite materials in the 21st centuryExercisesPart I: Component materialsChapter 2: Reinforced materials2.1 Introduction2.2 Glass fiber2.3 Carbon fiber2.4 Aramid2.5 Other reinforced fibersExercisesChapter 3: Matrix materials3.1 Overview3.2 Basic properties of matrix materials3.3 Technological properties of matrix materials3.4 Matrix resin of composites3.5 High performance resin matrix3.6 Resin matrix used for corrosion-resistant compositesExercisesChapter 4: Interface of polymer matrix composites4.1 The basic concept of interface4.2 The formation and action mechanism of interface4.3 Damage mechanism of interface4.4 Surface treatment of fiber4.5 Study on composite interfaceExercisesPart II: Processing of composite materialsChapter 5: Fabrication of the half-finished products for polymer composites5.1 The manufacturing method of thermoplastic granules5.2 The manufacturing of thermosetting molding compound5.3 Manufacturing method of continuous fiber prepregs for molding composites5.4 Manufacturing of reinforced thermoplastic sheetExercisesChapter 6: Forming technology of polymer matrix composites6.1 Overview6.2 Brief introduction of various molding techniques6.3 Mold and auxiliary materials6.4 Curing process of composite materialsExercisesChapter 7: Molding technology of sandwich structure composites7.1 The molding technology for honeycomb sandwich structure7.2 Molding process of foam sandwich structureExercisesPart III: Performance of composite materialsChapter 8: Elementary mechanical properties of composite materials8.1 Introduction8.1.5 The basic assumptions and the typical unit of micromechanics8.5 The shear behaviors of unidirectional and orthogonal composites8.6 The bending properties of composites8.7 The off-axis mechanical properties of composites8.8 Basic mechanical properties of multi-directional composite materialsExercisesChapter 9: Other mechanical properties of composite materials9.1 Impact, fatigue, creep, environmental effect, fracture and damage of composites9.2 The basic mechanical properties of sandwich structure compositeExercisesChapter 10: High frequency dielectric properties of composites and radome10.1 High frequency dielectric properties of glass fiber composites10.2 RadomeExercisesChapter 11: Other properties of polymer composites11.1 Thermal physical properties11.2 Heat resistance of composites and its applications11.3 Chemical corrosion resistance11.4 Wearability11.5 Flame resistanceExercisesIndex

Mer från samma serie

Fillers and Reinforcements for Advanced Nanocomposites

Yu Dong, Rehan Umer, Alan Kin Tak Lau, Australia) Dong, Yu (Associate Professor, School of Civil and Mechanical Engineering, Curtin University, Perth, United Arab Emirates) Umer, Rehan (Department of Aerospace Engineering, Khalifa University of Science and Technology & Research, Hong Kong) Tak Lau, Alan Kin (Department of Mechanical Engineering, The Hong Kong Polytechnic University, Yu Dong

Inbunden

3 199 kr

Structural Integrity and Durability of Advanced Composites

Peter Beaumont, C. Soutis, Alma Hodzic, UK) Beaumont, Peter (Cambridge University Department of Engineering and Wolfson College, Cambridge, UK) Soutis, C. (School of Mechanical, Aerospace and Civil Engineering and the Aerospace Research Institute, University of Manchester, UK) Hodzic, Alma (Faculty of Engineering, The University of Sheffield, Constantinos Soutis

Inbunden

4 069 kr

Structural Health Monitoring (SHM) in Aerospace Structures

Fuh-Gwo Yuan, USA) Yuan, Fuh-Gwo (Professor, Department of Mechanical and Aerospace Engineering, North Carolina State University

Inbunden

3 059 kr

Numerical Modelling of Failure in Advanced Composite Materials

Pedro P. Camanho, Stephen R. Hallett, Portugal) Camanho, Pedro P. (Professor at the Department of Mechanical Engineering, University of Porto, UK) Hallett, Stephen R. (Professor in Composite Structures, Faculty of Engineering, University of Bristol, Pedro Camanho, Stephen Hallett

Inbunden

3 529 kr

Handbook of Advances in Braided Composite Materials

Jason P. Carey, Jason P. Carey, Canada) Carey, Jason P. (Professor, Mechanical Engineering, University of Alberta

Inbunden

2 549 kr

Lightweight Ballistic Composites

Ashok Bhatnagar, USA) Bhatnagar, Ashok (Honeywell International Inc.

Inbunden

3 209 kr

Progress in Rubber Nanocomposites

Sabu Thomas, Hanna J. Maria, India) Thomas, Sabu (Professor, International and Interuniversity Centre for Nanoscience and Nanotechnology, Mahatma Gandhi University, Kerala, India) Maria, Hanna J. (Senior Researcher, Mahatma Gandhi University

Inbunden

2 829 kr

Green Composites

Caroline Baillie, Randika Jayasinghe, University San Diego) Baillie, Caroline (Professor of Praxis in Engineering and Social Justice, Shiley-Marcos School of Engineering, The University of Western Australia (UWA)) Jayasinghe, Randika (Faculty of Engineering, Computing and Mathematics

Inbunden

2 839 kr