Dr. Kishor Kumar Sadasivuni is an Assistant Professor at the Center for Advanced Materials, Qatar University, Doha, Qatar, with expertise in polymer composite materials and high-performance polymer nanocomposites for industrial applications. Since 2009, he has promoted interdisciplinary collaborations in nanocomposites and industrial technologies. His research includes sensor technology, piezoelectrics, energy storage, and flexible electronics. His prolific academic output encompasses numerous journal articles, book chapters, and edited volumes, with his publications amassing more than 17,000 citations. Dr. Kalim Deshmukh is a senior researcher at the New Technologies Research Centre, University of West Bohemia in Pilsen, Czech Republic. He has over 20 years of research experience in nanomaterials and polymeric materials, with particular expertise in polymer blends, nanocomposites, and nanohybrids. His work emphasizes nanoscale dispersion, interfacial chemistry, and structure–property relationships that influence material performance in applications such as energy storage, gas sensing, biosensing, electromagnetic interference (EMI) shielding, and high-k dielectrics. He has authored more than 200 publications, including original research articles and review papers, in leading international journals and with major publishers, such as the Royal Society of Chemistry (RSC), American Chemical Society (ACS), Elsevier, Wiley-VCH, Springer, and Taylor & Francis. In addition to his research contributions, he has edited or co-edited several books published by ACS, RSC, Elsevier, Springer, Wiley-VCH, and Wiley Scrivener. Dr. S. K. Khadheer Pasha obtained his M.Sc. degree in Physics from Osmania University, followed by an MPhil degree from Anna University, and PhD degree in physics from the Department of Physics, Vellore Institute of Technology (VIT), India. He is currently working as a Senior Assistant Professor in the Department of Physics, VIT-AP University. He has about seven years of teaching and 12 years of research experience. His research is mainly focused on the synthesis of nanocomposite materials for various applications such as energy storage, gas sensors, and EMI shielding. Dr. Tomáš Kovářík is the Head of Department of Chemical Processes and Biomaterials at New Technologies - Research Centre, University of West Bohemia. Dr. Tomáš Kovářík completed an Ing. degree in Material Science and Engineering followed by a Ph.D. degree in material science from the Department of Materials and Engineering Metallurgy from the University of West Bohemia, Pilsen, Czech Republic. Since 2013, he has been running a research program and academic activities in material science focused on materials and technologies. Since 2017, he has been the co-researcher on international projects within the European Commission - Structural funds on the topic of composite structures and porous materials. His research interest is mainly devoted to the synthesis and characterization of porous inorganic materials the functionalization/incorporation of carbon nanoparticles. Besides, his focus is on the thermal analysis data processing and interpretation in the description of the thermal stability of materials. He has published over 40 research articles in peer-reviewed journals and international impacted journals like Materials & Design, Journal of Thermal Analysis and Calorimetry, Construction and Building Materials, Journal of Analytical and Applied Pyrolysis, Thermochemical Acta etc.

• 1. Introduction to 2D MXenes: Fundamental Aspects, MAX Phases and MXene Derivatives, Current Challenges and Future Prospects2. Synthesis Methods and Surface Chemistry/Functionalization of MXene3. Structure, Defects and Electronic Properties of MXenes4. Optical and Mechanical Properties of MXenes5. Topological Properties of MXenes6. MXenes and their Composites for Energy Storage and Energy Conversion7. MXenes and their Composites: An Emerging Materials for Gas Sensing and Biosensing8. MXene and their Composites as Piezoresistive Sensors9. MXenes and their Composites for Lithium and Sodium Ion Battery Applications10. MXenes Based Materials for Lithium-Sulphur and Multivalent Rechargeable Batteries11. MXenes and their Composites for Hybrid Capacitors and Supercapacitors12. MXenes and their Composites: A Promising Materials for Hydrogen Storag13. MXene and their Composites for Flexible Electronics14. Applications of MXenes and their Composites in Catalysis and Photoelectrocatalysis15. MXenes and their Composites Based Materials for Medical and Biomedical Applications16. MXenes and their Composite for Potential Antimicrobial Applications17. MXene Based Materials for Remediation of Environmental Pollutants18. MXene Based Molecular Sieving Membranes for Highly Efficient Gas Separation19. MXene Based Membranes for Water Desalination20. MXenes Based Multifunctional Polymer Composites for EMI Shielding Applications21. MXenes and their Composites for Energy Harvesting Applications22. MXenes Based Flexible Polymer Composites as High Dielectric Constant Materials

Dr. Kishor Kumar Sadasivuni is an Assistant Professor at the Center for Advanced Materials, Qatar University, Doha, Qatar, with expertise in polymer composite materials and high-performance polymer nanocomposites for industrial applications. Since 2009, he has promoted interdisciplinary collaborations in nanocomposites and industrial technologies. His research includes sensor technology, piezoelectrics, energy storage, and flexible electronics. His prolific academic output encompasses numerous journal articles, book chapters, and edited volumes, with his publications amassing more than 17,000 citations. Dr. Kalim Deshmukh is a senior researcher at the New Technologies Research Centre, University of West Bohemia in Pilsen, Czech Republic. He has over 20 years of research experience in nanomaterials and polymeric materials, with particular expertise in polymer blends, nanocomposites, and nanohybrids. His work emphasizes nanoscale dispersion, interfacial chemistry, and structure–property relationships that influence material performance in applications such as energy storage, gas sensing, biosensing, electromagnetic interference (EMI) shielding, and high-k dielectrics. He has authored more than 200 publications, including original research articles and review papers, in leading international journals and with major publishers, such as the Royal Society of Chemistry (RSC), American Chemical Society (ACS), Elsevier, Wiley-VCH, Springer, and Taylor & Francis. In addition to his research contributions, he has edited or co-edited several books published by ACS, RSC, Elsevier, Springer, Wiley-VCH, and Wiley Scrivener. Dr. S. K. Khadheer Pasha obtained his M.Sc. degree in Physics from Osmania University, followed by an MPhil degree from Anna University, and PhD degree in physics from the Department of Physics, Vellore Institute of Technology (VIT), India. He is currently working as a Senior Assistant Professor in the Department of Physics, VIT-AP University. He has about seven years of teaching and 12 years of research experience. His research is mainly focused on the synthesis of nanocomposite materials for various applications such as energy storage, gas sensors, and EMI shielding. Dr. Tomáš Kovářík is the Head of Department of Chemical Processes and Biomaterials at New Technologies - Research Centre, University of West Bohemia. Dr. Tomáš Kovářík completed an Ing. degree in Material Science and Engineering followed by a Ph.D. degree in material science from the Department of Materials and Engineering Metallurgy from the University of West Bohemia, Pilsen, Czech Republic. Since 2013, he has been running a research program and academic activities in material science focused on materials and technologies. Since 2017, he has been the co-researcher on international projects within the European Commission - Structural funds on the topic of composite structures and porous materials. His research interest is mainly devoted to the synthesis and characterization of porous inorganic materials the functionalization/incorporation of carbon nanoparticles. Besides, his focus is on the thermal analysis data processing and interpretation in the description of the thermal stability of materials. He has published over 40 research articles in peer-reviewed journals and international impacted journals like Materials & Design, Journal of Thermal Analysis and Calorimetry, Construction and Building Materials, Journal of Analytical and Applied Pyrolysis, Thermochemical Acta etc.

• 1. Introduction to 2D MXenes: Fundamental Aspects, MAX Phases and MXene Derivatives, Current Challenges and Future Prospects2. Synthesis Methods and Surface Chemistry/Functionalization of MXene3. Structure, Defects and Electronic Properties of MXenes4. Optical and Mechanical Properties of MXenes5. Topological Properties of MXenes6. MXenes and their Composites for Energy Storage and Energy Conversion7. MXenes and their Composites: An Emerging Materials for Gas Sensing and Biosensing8. MXene and their Composites as Piezoresistive Sensors9. MXenes and their Composites for Lithium and Sodium Ion Battery Applications10. MXenes Based Materials for Lithium-Sulphur and Multivalent Rechargeable Batteries11. MXenes and their Composites for Hybrid Capacitors and Supercapacitors12. MXenes and their Composites: A Promising Materials for Hydrogen Storag13. MXene and their Composites for Flexible Electronics14. Applications of MXenes and their Composites in Catalysis and Photoelectrocatalysis15. MXenes and their Composites Based Materials for Medical and Biomedical Applications16. MXenes and their Composite for Potential Antimicrobial Applications17. MXene Based Materials for Remediation of Environmental Pollutants18. MXene Based Molecular Sieving Membranes for Highly Efficient Gas Separation19. MXene Based Membranes for Water Desalination20. MXenes Based Multifunctional Polymer Composites for EMI Shielding Applications21. MXenes and their Composites for Energy Harvesting Applications22. MXenes Based Flexible Polymer Composites as High Dielectric Constant Materials

Dr. Kishor Kumar Sadasivuni is an Assistant Professor at the Center for Advanced Materials, Qatar University, Doha, Qatar, with expertise in polymer composite materials and high-performance polymer nanocomposites for industrial applications. Since 2009, he has promoted interdisciplinary collaborations in nanocomposites and industrial technologies. His research includes sensor technology, piezoelectrics, energy storage, and flexible electronics. His prolific academic output encompasses numerous journal articles, book chapters, and edited volumes, with his publications amassing more than 17,000 citations. Dr. Kalim Deshmukh is a senior researcher at the New Technologies Research Centre, University of West Bohemia in Pilsen, Czech Republic. He has over 20 years of research experience in nanomaterials and polymeric materials, with particular expertise in polymer blends, nanocomposites, and nanohybrids. His work emphasizes nanoscale dispersion, interfacial chemistry, and structure–property relationships that influence material performance in applications such as energy storage, gas sensing, biosensing, electromagnetic interference (EMI) shielding, and high-k dielectrics. He has authored more than 200 publications, including original research articles and review papers, in leading international journals and with major publishers, such as the Royal Society of Chemistry (RSC), American Chemical Society (ACS), Elsevier, Wiley-VCH, Springer, and Taylor & Francis. In addition to his research contributions, he has edited or co-edited several books published by ACS, RSC, Elsevier, Springer, Wiley-VCH, and Wiley Scrivener. Dr. S. K. Khadheer Pasha obtained his M.Sc. degree in Physics from Osmania University, followed by an MPhil degree from Anna University, and PhD degree in physics from the Department of Physics, Vellore Institute of Technology (VIT), India. He is currently working as a Senior Assistant Professor in the Department of Physics, VIT-AP University. He has about seven years of teaching and 12 years of research experience. His research is mainly focused on the synthesis of nanocomposite materials for various applications such as energy storage, gas sensors, and EMI shielding. Dr. Tomáš Kovářík is the Head of Department of Chemical Processes and Biomaterials at New Technologies - Research Centre, University of West Bohemia. Dr. Tomáš Kovářík completed an Ing. degree in Material Science and Engineering followed by a Ph.D. degree in material science from the Department of Materials and Engineering Metallurgy from the University of West Bohemia, Pilsen, Czech Republic. Since 2013, he has been running a research program and academic activities in material science focused on materials and technologies. Since 2017, he has been the co-researcher on international projects within the European Commission - Structural funds on the topic of composite structures and porous materials. His research interest is mainly devoted to the synthesis and characterization of porous inorganic materials the functionalization/incorporation of carbon nanoparticles. Besides, his focus is on the thermal analysis data processing and interpretation in the description of the thermal stability of materials. He has published over 40 research articles in peer-reviewed journals and international impacted journals like Materials & Design, Journal of Thermal Analysis and Calorimetry, Construction and Building Materials, Journal of Analytical and Applied Pyrolysis, Thermochemical Acta etc.

• 1. Introduction to 2D MXenes: Fundamental Aspects, MAX Phases and MXene Derivatives, Current Challenges and Future Prospects2. Synthesis Methods and Surface Chemistry/Functionalization of MXene3. Structure, Defects and Electronic Properties of MXenes4. Optical and Mechanical Properties of MXenes5. Topological Properties of MXenes6. MXenes and their Composites for Energy Storage and Energy Conversion7. MXenes and their Composites: An Emerging Materials for Gas Sensing and Biosensing8. MXene and their Composites as Piezoresistive Sensors9. MXenes and their Composites for Lithium and Sodium Ion Battery Applications10. MXenes Based Materials for Lithium-Sulphur and Multivalent Rechargeable Batteries11. MXenes and their Composites for Hybrid Capacitors and Supercapacitors12. MXenes and their Composites: A Promising Materials for Hydrogen Storag13. MXene and their Composites for Flexible Electronics14. Applications of MXenes and their Composites in Catalysis and Photoelectrocatalysis15. MXenes and their Composites Based Materials for Medical and Biomedical Applications16. MXenes and their Composite for Potential Antimicrobial Applications17. MXene Based Materials for Remediation of Environmental Pollutants18. MXene Based Molecular Sieving Membranes for Highly Efficient Gas Separation19. MXene Based Membranes for Water Desalination20. MXenes Based Multifunctional Polymer Composites for EMI Shielding Applications21. MXenes and their Composites for Energy Harvesting Applications22. MXenes Based Flexible Polymer Composites as High Dielectric Constant Materials