Ramesh K. Agarwal, Ph.D., is the William Palm Professor of Engineering in the Department of Mechanical Engineering and Materials Science at Washington University in St. Louis. From 1994 to 2001, he was the Sam Bloomfield Distinguished Professor and Executive Director of the National Institute for Aviation Research at Wichita State University. From 1978 to 1994, he worked in various scientific/managerial positions at McDonnell Douglas Research Laboratories in St. Louis and became Program Director and McDonnell Douglas Fellow in 1990. He received his Ph.D. in Aeronautical Sciences from Stanford University in 1975, an M.S. in Aeronautical Engineering from the University of Minnesota in 1969, and a B.S. in Mechanical Engineering from the Indian Institute of Technology, Kharagpur, in 1968. Professor Agarwal has worked in various areas of computational science and engineering including computational fluid dynamics (CFD), computational acoustics, magneto-hydrodynamics and electromagnetics, computational control theory and robotics, and multidisciplinary design and optimization. The range of applications in CFD includes subsonic, transonic and hypersonic flows, rarefied and micro-flows, active flow control, turbulence modeling, bio-fluid dynamics, turbomachinery and pumps, wind energy, energy efficiency of buildings, carbon capture and sequestration, and chemical looping combustion. He is the author and co-author of over 600 publications and serves on the editorial board of more than 20 journals. He has given many plenary, keynote, and invited lectures at various national and international conferences in over 60 countries worldwide. Professor Agarwal continues to serve on many professional, government, and industrial advisory committees. He is a Fellow of 28 professional societies including the AIAA, ASME, IEEE, SAE, AAAS, APS, ASEE, and IOP. Professor Agarwal has received many prestigious honors and national/international awards from various professional societies and organizations for his research contributions, including the AIAA Reed Aeronautics Award, SAE Medal of Honor, ASME Honorary Membership, and an Honorary Fellowship from the Royal Aeronautical Society.Yali Shao, Ph.D., is currently a lecturer in the Engineering Laboratory for Energy System Process Conversion and Emission Reduction Technology of Jiangsu Province, School of Energy and Mechanical Engineering of Nanjing Normal University in Nanjing. She received her Ph.D. in 2020 from the Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education, School of Energy and Environment at Southeast University, Nanjing, under the guidance of Prof. Baosheng Jin. Dr. Shao has collaborated extensively with Professor Ramesh K. Agarwal in the area of chemical looping combustion over the last five years, which is continuing. She has co-authored many publications with Professor Agarwal for international journals.

• Introduction.- Fundamental Concepts.- Process Simulation with Aspen Plus.- CFD Modelling Methodologies.- Eulerian Simulation of CLC Reactor.- Example of Lagrangian Simulation of CLC Reactor.- Simulation of Single Reactor for CLC.- Full-loop Simulation of CLC System.- Partial-Loop Simulation.- Binary Particle Bed Simulations in a Carbon Stripper.- Simulations of Solid-Fueled CLC Process.- Scaling Simulation of Spouted Fluidized Bed for CLC.- Single Particle Simulation of CLOU.- Carbon Capture and Sequestration combined with CLC.- Chemical Looping Applications Beyond Combustion.- Glossary.

Ramesh K. Agarwal, Ph.D., is the William Palm Professor of Engineering in the Department of Mechanical Engineering and Materials Science at Washington University in St. Louis. From 1994 to 2001, he was the Sam Bloomfield Distinguished Professor and Executive Director of the National Institute for Aviation Research at Wichita State University. From 1978 to 1994, he worked in various scientific/managerial positions at McDonnell Douglas Research Laboratories in St. Louis and became Program Director and McDonnell Douglas Fellow in 1990. He received his Ph.D. in Aeronautical Sciences from Stanford University in 1975, an M.S. in Aeronautical Engineering from the University of Minnesota in 1969, and a B.S. in Mechanical Engineering from the Indian Institute of Technology, Kharagpur, in 1968. Professor Agarwal has worked in various areas of computational science and engineering including computational fluid dynamics (CFD), computational acoustics, magneto-hydrodynamics and electromagnetics, computational control theory and robotics, and multidisciplinary design and optimization. The range of applications in CFD includes subsonic, transonic and hypersonic flows, rarefied and micro-flows, active flow control, turbulence modeling, bio-fluid dynamics, turbomachinery and pumps, wind energy, energy efficiency of buildings, carbon capture and sequestration, and chemical looping combustion. He is the author and co-author of over 600 publications and serves on the editorial board of more than 20 journals. He has given many plenary, keynote, and invited lectures at various national and international conferences in over 60 countries worldwide. Professor Agarwal continues to serve on many professional, government, and industrial advisory committees. He is a Fellow of 28 professional societies including the AIAA, ASME, IEEE, SAE, AAAS, APS, ASEE, and IOP. Professor Agarwal has received many prestigious honors and national/international awards from various professional societies and organizations for his research contributions, including the AIAA Reed Aeronautics Award, SAE Medal of Honor, ASME Honorary Membership, and an Honorary Fellowship from the Royal Aeronautical Society.Yali Shao, Ph.D., is currently a lecturer in the Engineering Laboratory for Energy System Process Conversion and Emission Reduction Technology of Jiangsu Province, School of Energy and Mechanical Engineering of Nanjing Normal University in Nanjing. She received her Ph.D. in 2020 from the Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education, School of Energy and Environment at Southeast University, Nanjing, under the guidance of Prof. Baosheng Jin. Dr. Shao has collaborated extensively with Professor Ramesh K. Agarwal in the area of chemical looping combustion over the last five years, which is continuing. She has co-authored many publications with Professor Agarwal for international journals.

• Introduction.- Fundamental Concepts.- Process Simulation with Aspen Plus.- CFD Modelling Methodologies.- Eulerian Simulation of CLC Reactor.- Example of Lagrangian Simulation of CLC Reactor.- Simulation of Single Reactor for CLC.- Full-loop Simulation of CLC System.- Partial-Loop Simulation.- Binary Particle Bed Simulations in a Carbon Stripper.- Simulations of Solid-Fueled CLC Process.- Scaling Simulation of Spouted Fluidized Bed for CLC.- Single Particle Simulation of CLOU.- Carbon Capture and Sequestration combined with CLC.- Chemical Looping Applications Beyond Combustion.- Glossary.

Ramesh K. Agarwal, Ph.D., is the William Palm Professor of Engineering in the Department of Mechanical Engineering and Materials Science at Washington University in St. Louis. From 1994 to 2001, he was the Sam Bloomfield Distinguished Professor and Executive Director of the National Institute for Aviation Research at Wichita State University. From 1978 to 1994, he worked in various scientific/managerial positions at McDonnell Douglas Research Laboratories in St. Louis and became Program Director and McDonnell Douglas Fellow in 1990. He received his Ph.D. in Aeronautical Sciences from Stanford University in 1975, an M.S. in Aeronautical Engineering from the University of Minnesota in 1969, and a B.S. in Mechanical Engineering from the Indian Institute of Technology, Kharagpur, in 1968. Professor Agarwal has worked in various areas of computational science and engineering including computational fluid dynamics (CFD), computational acoustics, magneto-hydrodynamics and electromagnetics, computational control theory and robotics, and multidisciplinary design and optimization. The range of applications in CFD includes subsonic, transonic and hypersonic flows, rarefied and micro-flows, active flow control, turbulence modeling, bio-fluid dynamics, turbomachinery and pumps, wind energy, energy efficiency of buildings, carbon capture and sequestration, and chemical looping combustion. He is the author and co-author of over 600 publications and serves on the editorial board of more than 20 journals. He has given many plenary, keynote, and invited lectures at various national and international conferences in over 60 countries worldwide. Professor Agarwal continues to serve on many professional, government, and industrial advisory committees. He is a Fellow of 28 professional societies including the AIAA, ASME, IEEE, SAE, AAAS, APS, ASEE, and IOP. Professor Agarwal has received many prestigious honors and national/international awards from various professional societies and organizations for his research contributions, including the AIAA Reed Aeronautics Award, SAE Medal of Honor, ASME Honorary Membership, and an Honorary Fellowship from the Royal Aeronautical Society.Yali Shao, Ph.D., is currently a lecturer in the Engineering Laboratory for Energy System Process Conversion and Emission Reduction Technology of Jiangsu Province, School of Energy and Mechanical Engineering of Nanjing Normal University in Nanjing. She received her Ph.D. in 2020 from the Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education, School of Energy and Environment at Southeast University, Nanjing, under the guidance of Prof. Baosheng Jin. Dr. Shao has collaborated extensively with Professor Ramesh K. Agarwal in the area of chemical looping combustion over the last five years, which is continuing. She has co-authored many publications with Professor Agarwal for international journals.

• Introduction.- Fundamental Concepts.- Process Simulation with Aspen Plus.- CFD Modelling Methodologies.- Eulerian Simulation of CLC Reactor.- Example of Lagrangian Simulation of CLC Reactor.- Simulation of Single Reactor for CLC.- Full-loop Simulation of CLC System.- Partial-Loop Simulation.- Binary Particle Bed Simulations in a Carbon Stripper.- Simulations of Solid-Fueled CLC Process.- Scaling Simulation of Spouted Fluidized Bed for CLC.- Single Particle Simulation of CLOU.- Carbon Capture and Sequestration combined with CLC.- Chemical Looping Applications Beyond Combustion.- Glossary.