Dr. Kasaei is currently a principal investigator at the Institute of Science and Innovation in Mechanical and Industrial Engineering. He received his PhD with honors in Mechanical Engineering from the Tarbiat Modares University (Iran) in 2016. He co-founded and managed a company active in the field of metal forming and a hardware startup accelerator in Iran. His current research activity focuses on the development of advanced forming and joining processes, including process and tool design, finite element modeling, testing and modeling of the mechanical behavior of materials and joints, and failure analysis. He is a member of the editorial board of Discover Mechanical Engineering (Springer) and of the scientific committee of Advanced Joining Processes and Engineering Manufacture conferences. Dr. Beygi holds a PhD in Welding and Joining from the Sharif University of Technology (Iran). Since 2014, he has been an Assistant Professor at Arak university (Iran), and currently is a principal investigator at the Institute of Science and Innovation in Mechanical and Industrial Engineering, where his research activities focus on joining of dissimilar materials by advanced joining processes; microstructural evolution during joining; and joints’ performance. He has authored Computational Concepts in Simulation of Welding Processes (2022, Springer) and several papers on the topic of welding. Eduardo A.S. Marques is an Associate Professor at the Department of Mechanical Engineering of the Faculty of Engineering of the University of Porto (FEUP) and investigator in the Advanced Joining Processes Unit of the Institute of Mechanical Engineering and Industrial Management (INEGI). He obtained his PhD in structural adhesive bonding for aerospace applications at FEUP in 2016.His research activity focuses on mechanical characterisation, numerical modelling and experimental testing of the mechanical behaviour of welded and bonded joints, with special attention to the effect of high strain rates, extreme temperature and high relative humidity on the behaviour of various materials and bonded structures. He has developed innovative techniques to join dissimilar material. He has published over 239 SCOPUS-index papers, amassed more than 4400 citations (h-index 36) and authored multiple books in the field of joining and material science. Ricardo J.C. Carbas (h-index 40, +6100 citations), is a senior researcher with extensive experience in joining technologies and project management. He is an expert in material testing and characterization, having developed several innovative design and manufacturing procedures for adhesive bonding, welding and joining by forming, for which he has been awarded ten patents. He is active in scientific dissemination, being the editor-in-chief of Engineering Manufacturing Letters (EML) journal (FEUP) and in the organization of conferences on materials and adhesive bonding: Luso-Brazilian Adhesion Conference (CLBA), International Conference on Materials Design and Applications (MDA), Advanced Joining Processes (AJP) and Ibero-American Conference on Composite Materials (IAMaC). He is an editorial board member of the 'Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications', 'Journal of Advanced Joining Processes' and 'Materials'. He does consulting work for national (e.g. Bosch, Amtrol) and international (e.g. Honda, Nagase Chemtex, John Deere, Safran, Infineon, Henkel, etc.) companies. Lucas F.M. da Silva is a Full Professor of Mechanical Engineering at the University of Porto (FEUP). He leads INEGI’s Advanced Joining Processes Unit (AJPU), a 35‑member team working on welded, plastic deformation, and adhesive joints, integrating mechanical characterization, fracture testing, analytical modeling, and finite element analysis. He has coordinated 35 research projects funded mainly by FCT and the European Commission. With 15 patents, his contributions also extend to practical innovations in joining processes. His publications include over 700 SCOPUS papers, approximately 23000 citations and an h-index of 74. His work has been recognized with awards such as the SAGE Best Paper Award, Donald Julius Groen Prize, FEUP Scientific Excellence Award (2013, 2018), and Pedagogical Excellence Award (2023). Prof. da Silva is editor‑in‑chief of multiple international journals and book series and organizes numerous international conferences on joining, materials, manufacturing, machine design, and engineering education. He is founder and president of the Portuguese Adhesion and Adhesives Association (EURADH member).

• 1. Clinching2. Clinching – A case study3. Self piercing riveting4. Self piercing riveting – A case study5. Friction-based processes6. Friction-based processes – A case study7. Novel joining processes8. Novel joining processes – A case study

Dr. Kasaei is currently a principal investigator at the Institute of Science and Innovation in Mechanical and Industrial Engineering. He received his PhD with honors in Mechanical Engineering from the Tarbiat Modares University (Iran) in 2016. He co-founded and managed a company active in the field of metal forming and a hardware startup accelerator in Iran. His current research activity focuses on the development of advanced forming and joining processes, including process and tool design, finite element modeling, testing and modeling of the mechanical behavior of materials and joints, and failure analysis. He is a member of the editorial board of Discover Mechanical Engineering (Springer) and of the scientific committee of Advanced Joining Processes and Engineering Manufacture conferences. Dr. Beygi holds a PhD in Welding and Joining from the Sharif University of Technology (Iran). Since 2014, he has been an Assistant Professor at Arak university (Iran), and currently is a principal investigator at the Institute of Science and Innovation in Mechanical and Industrial Engineering, where his research activities focus on joining of dissimilar materials by advanced joining processes; microstructural evolution during joining; and joints’ performance. He has authored Computational Concepts in Simulation of Welding Processes (2022, Springer) and several papers on the topic of welding. Eduardo A.S. Marques is an Associate Professor at the Department of Mechanical Engineering of the Faculty of Engineering of the University of Porto (FEUP) and investigator in the Advanced Joining Processes Unit of the Institute of Mechanical Engineering and Industrial Management (INEGI). He obtained his PhD in structural adhesive bonding for aerospace applications at FEUP in 2016.His research activity focuses on mechanical characterisation, numerical modelling and experimental testing of the mechanical behaviour of welded and bonded joints, with special attention to the effect of high strain rates, extreme temperature and high relative humidity on the behaviour of various materials and bonded structures. He has developed innovative techniques to join dissimilar material. He has published over 239 SCOPUS-index papers, amassed more than 4400 citations (h-index 36) and authored multiple books in the field of joining and material science. Ricardo J.C. Carbas (h-index 40, +6100 citations), is a senior researcher with extensive experience in joining technologies and project management. He is an expert in material testing and characterization, having developed several innovative design and manufacturing procedures for adhesive bonding, welding and joining by forming, for which he has been awarded ten patents. He is active in scientific dissemination, being the editor-in-chief of Engineering Manufacturing Letters (EML) journal (FEUP) and in the organization of conferences on materials and adhesive bonding: Luso-Brazilian Adhesion Conference (CLBA), International Conference on Materials Design and Applications (MDA), Advanced Joining Processes (AJP) and Ibero-American Conference on Composite Materials (IAMaC). He is an editorial board member of the 'Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications', 'Journal of Advanced Joining Processes' and 'Materials'. He does consulting work for national (e.g. Bosch, Amtrol) and international (e.g. Honda, Nagase Chemtex, John Deere, Safran, Infineon, Henkel, etc.) companies. Lucas F.M. da Silva is a Full Professor of Mechanical Engineering at the University of Porto (FEUP). He leads INEGI’s Advanced Joining Processes Unit (AJPU), a 35‑member team working on welded, plastic deformation, and adhesive joints, integrating mechanical characterization, fracture testing, analytical modeling, and finite element analysis. He has coordinated 35 research projects funded mainly by FCT and the European Commission. With 15 patents, his contributions also extend to practical innovations in joining processes. His publications include over 700 SCOPUS papers, approximately 23000 citations and an h-index of 74. His work has been recognized with awards such as the SAGE Best Paper Award, Donald Julius Groen Prize, FEUP Scientific Excellence Award (2013, 2018), and Pedagogical Excellence Award (2023). Prof. da Silva is editor‑in‑chief of multiple international journals and book series and organizes numerous international conferences on joining, materials, manufacturing, machine design, and engineering education. He is founder and president of the Portuguese Adhesion and Adhesives Association (EURADH member).

• 1. Clinching2. Clinching – A case study3. Self piercing riveting4. Self piercing riveting – A case study5. Friction-based processes6. Friction-based processes – A case study7. Novel joining processes8. Novel joining processes – A case study

Dr. Kasaei is currently a principal investigator at the Institute of Science and Innovation in Mechanical and Industrial Engineering. He received his PhD with honors in Mechanical Engineering from the Tarbiat Modares University (Iran) in 2016. He co-founded and managed a company active in the field of metal forming and a hardware startup accelerator in Iran. His current research activity focuses on the development of advanced forming and joining processes, including process and tool design, finite element modeling, testing and modeling of the mechanical behavior of materials and joints, and failure analysis. He is a member of the editorial board of Discover Mechanical Engineering (Springer) and of the scientific committee of Advanced Joining Processes and Engineering Manufacture conferences. Dr. Beygi holds a PhD in Welding and Joining from the Sharif University of Technology (Iran). Since 2014, he has been an Assistant Professor at Arak university (Iran), and currently is a principal investigator at the Institute of Science and Innovation in Mechanical and Industrial Engineering, where his research activities focus on joining of dissimilar materials by advanced joining processes; microstructural evolution during joining; and joints’ performance. He has authored Computational Concepts in Simulation of Welding Processes (2022, Springer) and several papers on the topic of welding. Eduardo A.S. Marques is an Associate Professor at the Department of Mechanical Engineering of the Faculty of Engineering of the University of Porto (FEUP) and investigator in the Advanced Joining Processes Unit of the Institute of Mechanical Engineering and Industrial Management (INEGI). He obtained his PhD in structural adhesive bonding for aerospace applications at FEUP in 2016.His research activity focuses on mechanical characterisation, numerical modelling and experimental testing of the mechanical behaviour of welded and bonded joints, with special attention to the effect of high strain rates, extreme temperature and high relative humidity on the behaviour of various materials and bonded structures. He has developed innovative techniques to join dissimilar material. He has published over 239 SCOPUS-index papers, amassed more than 4400 citations (h-index 36) and authored multiple books in the field of joining and material science. Ricardo J.C. Carbas (h-index 40, +6100 citations), is a senior researcher with extensive experience in joining technologies and project management. He is an expert in material testing and characterization, having developed several innovative design and manufacturing procedures for adhesive bonding, welding and joining by forming, for which he has been awarded ten patents. He is active in scientific dissemination, being the editor-in-chief of Engineering Manufacturing Letters (EML) journal (FEUP) and in the organization of conferences on materials and adhesive bonding: Luso-Brazilian Adhesion Conference (CLBA), International Conference on Materials Design and Applications (MDA), Advanced Joining Processes (AJP) and Ibero-American Conference on Composite Materials (IAMaC). He is an editorial board member of the 'Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications', 'Journal of Advanced Joining Processes' and 'Materials'. He does consulting work for national (e.g. Bosch, Amtrol) and international (e.g. Honda, Nagase Chemtex, John Deere, Safran, Infineon, Henkel, etc.) companies. Lucas F.M. da Silva is a Full Professor of Mechanical Engineering at the University of Porto (FEUP). He leads INEGI’s Advanced Joining Processes Unit (AJPU), a 35‑member team working on welded, plastic deformation, and adhesive joints, integrating mechanical characterization, fracture testing, analytical modeling, and finite element analysis. He has coordinated 35 research projects funded mainly by FCT and the European Commission. With 15 patents, his contributions also extend to practical innovations in joining processes. His publications include over 700 SCOPUS papers, approximately 23000 citations and an h-index of 74. His work has been recognized with awards such as the SAGE Best Paper Award, Donald Julius Groen Prize, FEUP Scientific Excellence Award (2013, 2018), and Pedagogical Excellence Award (2023). Prof. da Silva is editor‑in‑chief of multiple international journals and book series and organizes numerous international conferences on joining, materials, manufacturing, machine design, and engineering education. He is founder and president of the Portuguese Adhesion and Adhesives Association (EURADH member).

• 1. Clinching2. Clinching – A case study3. Self piercing riveting4. Self piercing riveting – A case study5. Friction-based processes6. Friction-based processes – A case study7. Novel joining processes8. Novel joining processes – A case study