Raden Sjarief Widjaja is a Professor at Institut Teknologi Sepuluh Nopember, with a Ph.D. from University of Strathclyde. He served as Vice Rector of ITS and held leadership roles at the Ministry of Marine Affairs and Fisheries. Internationally active, he contributed to Coral Triangle Initiative on Coral Reefs, Fisheries, and Food Security (CTI-CFF), the Southeast Asian Fisheries Development Center, the FAO Committee on Fisheries 33rd Session (FAO-COFI), and the High-Level Panel for Sustainable Ocean Economy. He is also a consultant and Head of Naval Architecture Board at the Indonesian Engineers Association.Yuda Apri Hermawan is an Assistant Professor at Institut Teknologi Sepuluh Nopember (ITS), with a PhD. from Kyushu University. His research focuses on marine dynamics, ship digitalization, and autonomous vessels. He leads the Digital Ship Technology Lab and manages international collaborations. He has published in international journals, led funded projects, and consults for major Indonesian companies in the naval and marine engineering fields.Hasanudin is an Assistant Professor at Institut Teknologi Sepuluh Nopember with PhD in Naval Architecture. His research focuses on ship stability, AI applications in maritime, and ship design. He has led projects funded by HETI and collaborated with government and private sectors. Since 2011, he has assisted the Indonesian National Transportation Safety Committee (KNKT) in maritime accident investigations, contributing significantly to ship safety and innovation in Indonesia.Azman Ismail is Associate Professor at Malaysian Institute of Marine Engineering Technology, Universiti Kuala Lumpur, Malaysia. He received his Ph.D. in mechanical engineering from Universiti Teknologi PETRONAS and master of engineering in mechanical-marine technology from Universiti Teknologi Malaysia. Prior to that, he was awarded a bachelor of engineering (hons) in electrical, electronics and system from Universiti Kebangsaan Malaysia, and graduate diploma in industrial education and training from the Royal Melbourne Institute of Technology, Australia. He grooms his technical skill at Victoria University of Technology, Australia, for advanced diploma in construction and repair technology (marine vessels). He is also active in research and development for welding and joining technologies especially for friction stir welding on tubular sections and flat panels. This also includes green technologies for sustainable marine and coastal development. He has published his research findings in indexed journals and book chapters.Fatin Nur Zulkipli is Lecturer in information management at the Universiti Teknologi MARA (UiTM) Machang Kelantan, Malaysia. She received her both bachelor’s and master’s degree in records and documents management in UiTM Puncak Perdana, Selangor Malaysia. So far, she has published several papers in high indexed journals as the main author and actively participates in innovation projects. She won a gold medal for both competition at the Nuclear Innovation Award organized by the Malaysian Nuclear Agency in 2021 and “ALive” Business Model Canvas at the International Competition of Entrepreneurship Business Innovation (iCEBIV) in 2022, respectively. She is actively involved in research related to health information management systems and records management especially on the adoption of mobile health records management implementation with legal compliance. Currently, she is at the final stage of her Ph.D. in information management at UiTM Puncak Perdana, Shah Alam Selangor, Malaysia.Andreas Öchsner is Full Professor of Lightweight Design and Structural Simulation at Esslingen University, Germany. After completing his Dipl.-Ing. degree in Aeronautical Engineering at the University of Stuttgart, he served as an Assistant at the University of Erlangen-Nuremberg from 1997 to 2003 while pursuing his Doctor degree. From 2003 to 2006, he was Assist. Prof. at the University of Aveiro, Portugal. He spent seven years (2007–2013) as Full Professor at the Technical University of Malaysia. From 2014 to 2017, he was Full Professor at the School of Engineering, Griffith University, Australia, and Leader of the Mechanical Engineering Program.

• Optimization of a Propeller Boss Cap Fin Using the Response Surface Method.- Optimizing the Number of Mooring Lines to Enhance the Station Keeping of 12 MW Floating Offshore Wind Turbines.- Dynamic Response Analysis of Super Cone SCN 1800 Type Fender System due to Ship Operating Load Behavior.- Dynamic Analysis of a 5 MW Semi-Submersible Floating Offshore Wind Turbine in Arafura Sea Based on Fully Coupled Hydro-Aero-Servo-Elastic Modeling.- Fundamental Study of Suction Pile Performance and Seabed Interaction.- Integration and Optimization of a Dual Wave Energy System as the Future of Renewable Energy in Indonesia.- Monitoring Welders Performance in Flux-Cored Arc Welding Using Hand Motion Wearable Sensors and Support Vector Machine.- Fatigue Life Analysis of a Patrol Vessel with a Bimetal Structure.- Roll Decay Experiment on RoPax Open Car Deck with Inboard Side Casings and Outboard Side Casings.- Predicting Crack Growth in Ship Polyurethane-Steel Sandwich Structures: A Regression-Based Paris Law Coefficient Study.- Three-point Flexural Test Method to Investigate Damage Behavior of Polyurethane-Core Sandwich Ship Structures.- Debonding Localization Assessment on Rectangular Sandwich Plates Using the Mode Shape Curvature Square Method.- Technical and Financial Feasibility Analysis of a Tidal Currents Power Plant.- Stress Concentration Factor Analysis for Welded Marine Structures: Benchmark Study on Utilization of Integrated 3D Laser Scanning and Finite Element Simulation.- A Numerical Study of the Sensitivity of Damage Conditions on the Turret Mooring to Motion Responses of Floating Liquified Natural Gas Systems and Axial Tensions of Mooring Lines.- The Effect of Hoses Shape on End-Loads in Chinese Lantern Type of Subsea Hoses Based on Hydrodynamics Simulation.- Analysis of Hydrodynamic Motion Behavior at Various Porosities on Porous Single-Slope Floating Breakwaters.- Computational Fluid Dynamics Wave Reflection on Porous Double-Slope Floating Breakwaters.- Longitudinal Bending Strength in a High-Density Polyethylene Boat Hull due to Operational Condition.- Identification of Debonding Propagation in Ship Deck Sandwich Materials – Experimental Investigation.- Numerical Study of the Effect of Tilt and Yaw Sofa Angles on Boiler Rear Pass Temperature Deviation and NOx Content on a Tangentially Fired Pulverized Coal Boiler at Negative Tilt Burner Angle.- Numerical Study of Optimal Combustion in a Tangentially-Fired Boiler Coal Boiler by Considering the Rear Pass Temperature.- Design and Evaluation of Silt Curtains and Geotextile for Minimizing Environmental Impact of Dredging Projects.- A Wind-Assisted Propulsion Ship within the Framework of Energy Efficiency and Decarbonization: An Overview.- Mechanisms of Bubbles Coalescence in a Circular Static Liquid Column.- Train Wheelset Vibration Effect to Pregnant Women: Review of Detection Methods to Minimize the Vibration Impact Towards Fetus Development.- Biosensor–Based Microfluidic Chip Fabrication for the treatment of Microbacteria in Women.- Liquefied Petroleum Gas Monitoring System.- Optimization of Forward Diving Plane Locations for a Fully Submerged Submarine.- Lifting Analysis of a Fixed Jacket Structure.- Investigation of Microstructure, Corrosion Behavior, and Hardness in Sensitized AISI 316 Stainless Steel Subjected to Solution Annealing.- Wafer Defects Inspection Using Image Processing Techniques.- Simulation Study on the Effect of Different Heat Sink Profiles for Energy Harvesting Application.- Harnessing LSTM for Nonlinear Current Modeling in Smart Energy Systems.- Hybrid CFD-NNARX Modeling of a Magnetorheological Fluid Single Valve.- Analysis of Active Compounds and Microbial Activity of Toothpaste Formulated from Citrus Hystrix and Lagenaria Siceraria.

Raden Sjarief Widjaja is a Professor at Institut Teknologi Sepuluh Nopember, with a Ph.D. from University of Strathclyde. He served as Vice Rector of ITS and held leadership roles at the Ministry of Marine Affairs and Fisheries. Internationally active, he contributed to Coral Triangle Initiative on Coral Reefs, Fisheries, and Food Security (CTI-CFF), the Southeast Asian Fisheries Development Center, the FAO Committee on Fisheries 33rd Session (FAO-COFI), and the High-Level Panel for Sustainable Ocean Economy. He is also a consultant and Head of Naval Architecture Board at the Indonesian Engineers Association.Yuda Apri Hermawan is an Assistant Professor at Institut Teknologi Sepuluh Nopember (ITS), with a PhD. from Kyushu University. His research focuses on marine dynamics, ship digitalization, and autonomous vessels. He leads the Digital Ship Technology Lab and manages international collaborations. He has published in international journals, led funded projects, and consults for major Indonesian companies in the naval and marine engineering fields.Hasanudin is an Assistant Professor at Institut Teknologi Sepuluh Nopember with PhD in Naval Architecture. His research focuses on ship stability, AI applications in maritime, and ship design. He has led projects funded by HETI and collaborated with government and private sectors. Since 2011, he has assisted the Indonesian National Transportation Safety Committee (KNKT) in maritime accident investigations, contributing significantly to ship safety and innovation in Indonesia.Azman Ismail is Associate Professor at Malaysian Institute of Marine Engineering Technology, Universiti Kuala Lumpur, Malaysia. He received his Ph.D. in mechanical engineering from Universiti Teknologi PETRONAS and master of engineering in mechanical-marine technology from Universiti Teknologi Malaysia. Prior to that, he was awarded a bachelor of engineering (hons) in electrical, electronics and system from Universiti Kebangsaan Malaysia, and graduate diploma in industrial education and training from the Royal Melbourne Institute of Technology, Australia. He grooms his technical skill at Victoria University of Technology, Australia, for advanced diploma in construction and repair technology (marine vessels). He is also active in research and development for welding and joining technologies especially for friction stir welding on tubular sections and flat panels. This also includes green technologies for sustainable marine and coastal development. He has published his research findings in indexed journals and book chapters.Fatin Nur Zulkipli is Lecturer in information management at the Universiti Teknologi MARA (UiTM) Machang Kelantan, Malaysia. She received her both bachelor’s and master’s degree in records and documents management in UiTM Puncak Perdana, Selangor Malaysia. So far, she has published several papers in high indexed journals as the main author and actively participates in innovation projects. She won a gold medal for both competition at the Nuclear Innovation Award organized by the Malaysian Nuclear Agency in 2021 and “ALive” Business Model Canvas at the International Competition of Entrepreneurship Business Innovation (iCEBIV) in 2022, respectively. She is actively involved in research related to health information management systems and records management especially on the adoption of mobile health records management implementation with legal compliance. Currently, she is at the final stage of her Ph.D. in information management at UiTM Puncak Perdana, Shah Alam Selangor, Malaysia.Andreas Öchsner is Full Professor of Lightweight Design and Structural Simulation at Esslingen University, Germany. After completing his Dipl.-Ing. degree in Aeronautical Engineering at the University of Stuttgart, he served as an Assistant at the University of Erlangen-Nuremberg from 1997 to 2003 while pursuing his Doctor degree. From 2003 to 2006, he was Assist. Prof. at the University of Aveiro, Portugal. He spent seven years (2007–2013) as Full Professor at the Technical University of Malaysia. From 2014 to 2017, he was Full Professor at the School of Engineering, Griffith University, Australia, and Leader of the Mechanical Engineering Program.

• Optimization of a Propeller Boss Cap Fin Using the Response Surface Method.- Optimizing the Number of Mooring Lines to Enhance the Station Keeping of 12 MW Floating Offshore Wind Turbines.- Dynamic Response Analysis of Super Cone SCN 1800 Type Fender System due to Ship Operating Load Behavior.- Dynamic Analysis of a 5 MW Semi-Submersible Floating Offshore Wind Turbine in Arafura Sea Based on Fully Coupled Hydro-Aero-Servo-Elastic Modeling.- Fundamental Study of Suction Pile Performance and Seabed Interaction.- Integration and Optimization of a Dual Wave Energy System as the Future of Renewable Energy in Indonesia.- Monitoring Welders Performance in Flux-Cored Arc Welding Using Hand Motion Wearable Sensors and Support Vector Machine.- Fatigue Life Analysis of a Patrol Vessel with a Bimetal Structure.- Roll Decay Experiment on RoPax Open Car Deck with Inboard Side Casings and Outboard Side Casings.- Predicting Crack Growth in Ship Polyurethane-Steel Sandwich Structures: A Regression-Based Paris Law Coefficient Study.- Three-point Flexural Test Method to Investigate Damage Behavior of Polyurethane-Core Sandwich Ship Structures.- Debonding Localization Assessment on Rectangular Sandwich Plates Using the Mode Shape Curvature Square Method.- Technical and Financial Feasibility Analysis of a Tidal Currents Power Plant.- Stress Concentration Factor Analysis for Welded Marine Structures: Benchmark Study on Utilization of Integrated 3D Laser Scanning and Finite Element Simulation.- A Numerical Study of the Sensitivity of Damage Conditions on the Turret Mooring to Motion Responses of Floating Liquified Natural Gas Systems and Axial Tensions of Mooring Lines.- The Effect of Hoses Shape on End-Loads in Chinese Lantern Type of Subsea Hoses Based on Hydrodynamics Simulation.- Analysis of Hydrodynamic Motion Behavior at Various Porosities on Porous Single-Slope Floating Breakwaters.- Computational Fluid Dynamics Wave Reflection on Porous Double-Slope Floating Breakwaters.- Longitudinal Bending Strength in a High-Density Polyethylene Boat Hull due to Operational Condition.- Identification of Debonding Propagation in Ship Deck Sandwich Materials – Experimental Investigation.- Numerical Study of the Effect of Tilt and Yaw Sofa Angles on Boiler Rear Pass Temperature Deviation and NOx Content on a Tangentially Fired Pulverized Coal Boiler at Negative Tilt Burner Angle.- Numerical Study of Optimal Combustion in a Tangentially-Fired Boiler Coal Boiler by Considering the Rear Pass Temperature.- Design and Evaluation of Silt Curtains and Geotextile for Minimizing Environmental Impact of Dredging Projects.- A Wind-Assisted Propulsion Ship within the Framework of Energy Efficiency and Decarbonization: An Overview.- Mechanisms of Bubbles Coalescence in a Circular Static Liquid Column.- Train Wheelset Vibration Effect to Pregnant Women: Review of Detection Methods to Minimize the Vibration Impact Towards Fetus Development.- Biosensor–Based Microfluidic Chip Fabrication for the treatment of Microbacteria in Women.- Liquefied Petroleum Gas Monitoring System.- Optimization of Forward Diving Plane Locations for a Fully Submerged Submarine.- Lifting Analysis of a Fixed Jacket Structure.- Investigation of Microstructure, Corrosion Behavior, and Hardness in Sensitized AISI 316 Stainless Steel Subjected to Solution Annealing.- Wafer Defects Inspection Using Image Processing Techniques.- Simulation Study on the Effect of Different Heat Sink Profiles for Energy Harvesting Application.- Harnessing LSTM for Nonlinear Current Modeling in Smart Energy Systems.- Hybrid CFD-NNARX Modeling of a Magnetorheological Fluid Single Valve.- Analysis of Active Compounds and Microbial Activity of Toothpaste Formulated from Citrus Hystrix and Lagenaria Siceraria.

Raden Sjarief Widjaja is a Professor at Institut Teknologi Sepuluh Nopember, with a Ph.D. from University of Strathclyde. He served as Vice Rector of ITS and held leadership roles at the Ministry of Marine Affairs and Fisheries. Internationally active, he contributed to Coral Triangle Initiative on Coral Reefs, Fisheries, and Food Security (CTI-CFF), the Southeast Asian Fisheries Development Center, the FAO Committee on Fisheries 33rd Session (FAO-COFI), and the High-Level Panel for Sustainable Ocean Economy. He is also a consultant and Head of Naval Architecture Board at the Indonesian Engineers Association.Yuda Apri Hermawan is an Assistant Professor at Institut Teknologi Sepuluh Nopember (ITS), with a PhD. from Kyushu University. His research focuses on marine dynamics, ship digitalization, and autonomous vessels. He leads the Digital Ship Technology Lab and manages international collaborations. He has published in international journals, led funded projects, and consults for major Indonesian companies in the naval and marine engineering fields.Hasanudin is an Assistant Professor at Institut Teknologi Sepuluh Nopember with PhD in Naval Architecture. His research focuses on ship stability, AI applications in maritime, and ship design. He has led projects funded by HETI and collaborated with government and private sectors. Since 2011, he has assisted the Indonesian National Transportation Safety Committee (KNKT) in maritime accident investigations, contributing significantly to ship safety and innovation in Indonesia.Azman Ismail is Associate Professor at Malaysian Institute of Marine Engineering Technology, Universiti Kuala Lumpur, Malaysia. He received his Ph.D. in mechanical engineering from Universiti Teknologi PETRONAS and master of engineering in mechanical-marine technology from Universiti Teknologi Malaysia. Prior to that, he was awarded a bachelor of engineering (hons) in electrical, electronics and system from Universiti Kebangsaan Malaysia, and graduate diploma in industrial education and training from the Royal Melbourne Institute of Technology, Australia. He grooms his technical skill at Victoria University of Technology, Australia, for advanced diploma in construction and repair technology (marine vessels). He is also active in research and development for welding and joining technologies especially for friction stir welding on tubular sections and flat panels. This also includes green technologies for sustainable marine and coastal development. He has published his research findings in indexed journals and book chapters.Fatin Nur Zulkipli is Lecturer in information management at the Universiti Teknologi MARA (UiTM) Machang Kelantan, Malaysia. She received her both bachelor’s and master’s degree in records and documents management in UiTM Puncak Perdana, Selangor Malaysia. So far, she has published several papers in high indexed journals as the main author and actively participates in innovation projects. She won a gold medal for both competition at the Nuclear Innovation Award organized by the Malaysian Nuclear Agency in 2021 and “ALive” Business Model Canvas at the International Competition of Entrepreneurship Business Innovation (iCEBIV) in 2022, respectively. She is actively involved in research related to health information management systems and records management especially on the adoption of mobile health records management implementation with legal compliance. Currently, she is at the final stage of her Ph.D. in information management at UiTM Puncak Perdana, Shah Alam Selangor, Malaysia.Andreas Öchsner is Full Professor of Lightweight Design and Structural Simulation at Esslingen University, Germany. After completing his Dipl.-Ing. degree in Aeronautical Engineering at the University of Stuttgart, he served as an Assistant at the University of Erlangen-Nuremberg from 1997 to 2003 while pursuing his Doctor degree. From 2003 to 2006, he was Assist. Prof. at the University of Aveiro, Portugal. He spent seven years (2007–2013) as Full Professor at the Technical University of Malaysia. From 2014 to 2017, he was Full Professor at the School of Engineering, Griffith University, Australia, and Leader of the Mechanical Engineering Program.

• Optimization of a Propeller Boss Cap Fin Using the Response Surface Method.- Optimizing the Number of Mooring Lines to Enhance the Station Keeping of 12 MW Floating Offshore Wind Turbines.- Dynamic Response Analysis of Super Cone SCN 1800 Type Fender System due to Ship Operating Load Behavior.- Dynamic Analysis of a 5 MW Semi-Submersible Floating Offshore Wind Turbine in Arafura Sea Based on Fully Coupled Hydro-Aero-Servo-Elastic Modeling.- Fundamental Study of Suction Pile Performance and Seabed Interaction.- Integration and Optimization of a Dual Wave Energy System as the Future of Renewable Energy in Indonesia.- Monitoring Welders Performance in Flux-Cored Arc Welding Using Hand Motion Wearable Sensors and Support Vector Machine.- Fatigue Life Analysis of a Patrol Vessel with a Bimetal Structure.- Roll Decay Experiment on RoPax Open Car Deck with Inboard Side Casings and Outboard Side Casings.- Predicting Crack Growth in Ship Polyurethane-Steel Sandwich Structures: A Regression-Based Paris Law Coefficient Study.- Three-point Flexural Test Method to Investigate Damage Behavior of Polyurethane-Core Sandwich Ship Structures.- Debonding Localization Assessment on Rectangular Sandwich Plates Using the Mode Shape Curvature Square Method.- Technical and Financial Feasibility Analysis of a Tidal Currents Power Plant.- Stress Concentration Factor Analysis for Welded Marine Structures: Benchmark Study on Utilization of Integrated 3D Laser Scanning and Finite Element Simulation.- A Numerical Study of the Sensitivity of Damage Conditions on the Turret Mooring to Motion Responses of Floating Liquified Natural Gas Systems and Axial Tensions of Mooring Lines.- The Effect of Hoses Shape on End-Loads in Chinese Lantern Type of Subsea Hoses Based on Hydrodynamics Simulation.- Analysis of Hydrodynamic Motion Behavior at Various Porosities on Porous Single-Slope Floating Breakwaters.- Computational Fluid Dynamics Wave Reflection on Porous Double-Slope Floating Breakwaters.- Longitudinal Bending Strength in a High-Density Polyethylene Boat Hull due to Operational Condition.- Identification of Debonding Propagation in Ship Deck Sandwich Materials – Experimental Investigation.- Numerical Study of the Effect of Tilt and Yaw Sofa Angles on Boiler Rear Pass Temperature Deviation and NOx Content on a Tangentially Fired Pulverized Coal Boiler at Negative Tilt Burner Angle.- Numerical Study of Optimal Combustion in a Tangentially-Fired Boiler Coal Boiler by Considering the Rear Pass Temperature.- Design and Evaluation of Silt Curtains and Geotextile for Minimizing Environmental Impact of Dredging Projects.- A Wind-Assisted Propulsion Ship within the Framework of Energy Efficiency and Decarbonization: An Overview.- Mechanisms of Bubbles Coalescence in a Circular Static Liquid Column.- Train Wheelset Vibration Effect to Pregnant Women: Review of Detection Methods to Minimize the Vibration Impact Towards Fetus Development.- Biosensor–Based Microfluidic Chip Fabrication for the treatment of Microbacteria in Women.- Liquefied Petroleum Gas Monitoring System.- Optimization of Forward Diving Plane Locations for a Fully Submerged Submarine.- Lifting Analysis of a Fixed Jacket Structure.- Investigation of Microstructure, Corrosion Behavior, and Hardness in Sensitized AISI 316 Stainless Steel Subjected to Solution Annealing.- Wafer Defects Inspection Using Image Processing Techniques.- Simulation Study on the Effect of Different Heat Sink Profiles for Energy Harvesting Application.- Harnessing LSTM for Nonlinear Current Modeling in Smart Energy Systems.- Hybrid CFD-NNARX Modeling of a Magnetorheological Fluid Single Valve.- Analysis of Active Compounds and Microbial Activity of Toothpaste Formulated from Citrus Hystrix and Lagenaria Siceraria.