Shubhabrata Datta presently Research Professor in the Department of Mechanical Engineering, SRM Institute of Science and Technology, Chennai, India, did his Bachelors, Masters and PhD in Engineering from Indian Institute of Engineering Science and Technology, Shibpur, India (previously known as B.E. College Shibpur) in the field of Metallurgical and Materials Engineering. Dr. Datta has more than 28 years of teaching and research experience. His research interest is in the domain of design of materials using artificial intelligence and machine learning techniques. He was bestowed with the Exchange Scientist Award from Royal Academy of Engineering, UK and worked in the University of Sheffield, UK. He also worked Dept of Materials Science and Engineering, Helsinki University of Technology, Finland, Dept of Materials Science and Engineering, Iowa State University, Ames, USA and Heat Engineering Lab, Dept of Chemical Engineering, Åbo Akademi University, Finland as Visiting Scientist. He is a Fellow of Institution of Engineers (India), Associate Editor, Journal of the Institution of Engineers (India): Series D, and editorial board member of several international journals. J. Paulo Davim received his Ph.D. degree in Mechanical Engineering in 1997, M.Sc. degree in Mechanical Engineering (materials and manufacturing processes) in 1991, Mechanical Engineering degree (5 years) in 1986, from the University of Porto (FEUP), the Aggregate title (Full Habilitation) from the University of Coimbra in 2005 and the D.Sc. from London Metropolitan University in 2013. He is Senior Chartered Engineer by the Portuguese Institution of Engineers with an MBA and Specialist title in Engineering and Industrial Management. He is also Eur Ing by FEANI-Brussels and Fellow (FIET) by IET-London. Currently, he is Professor at the Department of Mechanical Engineering of the University of Aveiro, Portugal. He has more than 30 years of teaching and research experience in Manufacturing, Materials, Mechanical and Industrial Engineering, with special emphasis in Machining & Tribology. He has also interest in Management, Engineering Education and Higher Education for Sustainability. He has guided large numbers of postdoc, Ph.D. and master’s students as well as has coordinated and participated in several financed research projects. He has received several scientific awards. He has worked as evaluator of projects for ERC-European Research Council and other international research agencies as well as examiner of Ph.D. thesis for many universities in different countries. He is the Editor in Chief of several international journals, Guest Editor of journals, books Editor, book Series Editor and Scientific Advisory for many international journals and conferences.

• Fundamentals of Machine learning.- Neural network model identification studies to predict residual stress of a steel plate based on a non-destructive Barkhausen noise measurement.- Data Driven Optimization of Blast Furnace Iron Making Process Using Evolutionary Deep Learning.- A brief appraisal of machine learning in industrial sensing probes.- Mining the genesis of sliver defects through Rough and Fuzzy Set Theories.

Shubhabrata Datta presently Research Professor in the Department of Mechanical Engineering, SRM Institute of Science and Technology, Chennai, India, did his Bachelors, Masters and PhD in Engineering from Indian Institute of Engineering Science and Technology, Shibpur, India (previously known as B.E. College Shibpur) in the field of Metallurgical and Materials Engineering. Dr. Datta has more than 28 years of teaching and research experience. His research interest is in the domain of design of materials using artificial intelligence and machine learning techniques. He was bestowed with the Exchange Scientist Award from Royal Academy of Engineering, UK and worked in the University of Sheffield, UK. He also worked Dept of Materials Science and Engineering, Helsinki University of Technology, Finland, Dept of Materials Science and Engineering, Iowa State University, Ames, USA and Heat Engineering Lab, Dept of Chemical Engineering, Åbo Akademi University, Finland as Visiting Scientist. He is a Fellow of Institution of Engineers (India), Associate Editor, Journal of the Institution of Engineers (India): Series D, and editorial board member of several international journals. J. Paulo Davim received his Ph.D. degree in Mechanical Engineering in 1997, M.Sc. degree in Mechanical Engineering (materials and manufacturing processes) in 1991, Mechanical Engineering degree (5 years) in 1986, from the University of Porto (FEUP), the Aggregate title (Full Habilitation) from the University of Coimbra in 2005 and the D.Sc. from London Metropolitan University in 2013. He is Senior Chartered Engineer by the Portuguese Institution of Engineers with an MBA and Specialist title in Engineering and Industrial Management. He is also Eur Ing by FEANI-Brussels and Fellow (FIET) by IET-London. Currently, he is Professor at the Department of Mechanical Engineering of the University of Aveiro, Portugal. He has more than 30 years of teaching and research experience in Manufacturing, Materials, Mechanical and Industrial Engineering, with special emphasis in Machining & Tribology. He has also interest in Management, Engineering Education and Higher Education for Sustainability. He has guided large numbers of postdoc, Ph.D. and master’s students as well as has coordinated and participated in several financed research projects. He has received several scientific awards. He has worked as evaluator of projects for ERC-European Research Council and other international research agencies as well as examiner of Ph.D. thesis for many universities in different countries. He is the Editor in Chief of several international journals, Guest Editor of journals, books Editor, book Series Editor and Scientific Advisory for many international journals and conferences.

• Fundamentals of Machine learning.- Neural network model identification studies to predict residual stress of a steel plate based on a non-destructive Barkhausen noise measurement.- Data Driven Optimization of Blast Furnace Iron Making Process Using Evolutionary Deep Learning.- A brief appraisal of machine learning in industrial sensing probes.- Mining the genesis of sliver defects through Rough and Fuzzy Set Theories.

Shubhabrata Datta presently Research Professor in the Department of Mechanical Engineering, SRM Institute of Science and Technology, Chennai, India, did his Bachelors, Masters and PhD in Engineering from Indian Institute of Engineering Science and Technology, Shibpur, India (previously known as B.E. College Shibpur) in the field of Metallurgical and Materials Engineering. Dr. Datta has more than 28 years of teaching and research experience. His research interest is in the domain of design of materials using artificial intelligence and machine learning techniques. He was bestowed with the Exchange Scientist Award from Royal Academy of Engineering, UK and worked in the University of Sheffield, UK. He also worked Dept of Materials Science and Engineering, Helsinki University of Technology, Finland, Dept of Materials Science and Engineering, Iowa State University, Ames, USA and Heat Engineering Lab, Dept of Chemical Engineering, Åbo Akademi University, Finland as Visiting Scientist. He is a Fellow of Institution of Engineers (India), Associate Editor, Journal of the Institution of Engineers (India): Series D, and editorial board member of several international journals. J. Paulo Davim received his Ph.D. degree in Mechanical Engineering in 1997, M.Sc. degree in Mechanical Engineering (materials and manufacturing processes) in 1991, Mechanical Engineering degree (5 years) in 1986, from the University of Porto (FEUP), the Aggregate title (Full Habilitation) from the University of Coimbra in 2005 and the D.Sc. from London Metropolitan University in 2013. He is Senior Chartered Engineer by the Portuguese Institution of Engineers with an MBA and Specialist title in Engineering and Industrial Management. He is also Eur Ing by FEANI-Brussels and Fellow (FIET) by IET-London. Currently, he is Professor at the Department of Mechanical Engineering of the University of Aveiro, Portugal. He has more than 30 years of teaching and research experience in Manufacturing, Materials, Mechanical and Industrial Engineering, with special emphasis in Machining & Tribology. He has also interest in Management, Engineering Education and Higher Education for Sustainability. He has guided large numbers of postdoc, Ph.D. and master’s students as well as has coordinated and participated in several financed research projects. He has received several scientific awards. He has worked as evaluator of projects for ERC-European Research Council and other international research agencies as well as examiner of Ph.D. thesis for many universities in different countries. He is the Editor in Chief of several international journals, Guest Editor of journals, books Editor, book Series Editor and Scientific Advisory for many international journals and conferences.

• Fundamentals of Machine learning.- Neural network model identification studies to predict residual stress of a steel plate based on a non-destructive Barkhausen noise measurement.- Data Driven Optimization of Blast Furnace Iron Making Process Using Evolutionary Deep Learning.- A brief appraisal of machine learning in industrial sensing probes.- Mining the genesis of sliver defects through Rough and Fuzzy Set Theories.