Del 43 i serien Solid Mechanics and Its Applications

IUTAM Symposium on Optimization of Mechanical Systems

Proceedings of the IUTAM Symposium held in Stuttgart, Germany, 26–31 March 1995

Häftad, Engelska, 2011

729 kr

Beställningsvara. Skickas inom 10-15 vardagar. Fri frakt för medlemmar vid köp för minst 249 kr.

The International Union of Theoretical and Applied Mechanics (IUTAM) initiated and sponsored an International Symposium on Optimization of Mechanical Systems held in 1995 in Stuttgart, Germany. The Symposium was intended to bring together scientists working in different fields of optimization to exchange ideas and to discuss new trends with special emphasis on multi body systems. A Scientific Committee was appointed by the Bureau of IUTAM with the following members: S. Arimoto (Japan) EL. Chernousko (Russia) M. Geradin (Belgium) E.J. Haug (U.S.A.) C.A.M. Soares (Portugal) N. Olhoff (Denmark) W.O. Schiehlen (Germany, Chairman) K. Schittkowski (Germany) R.S. Sharp (U.K.) W. Stadler (U.S.A.) H.-B. Zhao (China) This committee selected the participants to be invited and the papers to be presented at the Symposium. As a result of this procedure, 90 active scientific participants from 20 countries followed the invitation, and 49 papers were presented in lecture and poster sessions.

Produktinformation

Utgivningsdatum2011-09-26
Mått160 x 240 x 22 mm
Vikt643 g
FormatHäftad
SpråkEngelska
SerieSolid Mechanics and Its Applications
Antal sidor375
FörlagSpringer
ISBN9789401065559

Tillhör följande kategorier

Decomposition and Sensitivity Analysis for Some Dynamic Problems of Optimal Design.- A Min-Max Problem of Optimal Actuator Placement for Lifting.- Optimization of Structure & Material Properties for Solids Composed of Softening Material.- Multibody Systems Modeling and Optimization Problems of Lower Limb Prostheses.- Multi-criteria Multi-model Design Optimization.- On the Automatic Differentiation of Computer Programs and an Application to Multibody Systems.- Layout of Linear and Nonlinear Structures by Shape and Topology Optimization.- Constrained Control in a Mechanical System with Two Degrees of Freedom.- A New Approach to the Min-Max Dynamic Response Optimization.- Considering Local Buckling Effects for the Optimization of Stiffened Composite Panels.- Optimization of Multibody Systems Using Approximation Concepts.- Optimal Rocking and Damping of a Swing.- An Integrated Strategy for the Control of Complex Mechanical Systems Based on Sub-System Optimality Criteria.- Design Optimization of a Solid Surface Deployable Antenna.- Perimeter Constrained Topology Optimization of Continuum Structures.- Optimization of Laminate Strength.- An Efficient Method for Synthesis of Mechanisms Using an Optimization Method.- Synthesis of Mechanisms Including the Shape of Bodies as Design Variables.- Optimization of a Spatial Transmission Linkage for Heavy Manipulators.- Robust Integrated Design of Controlled Multibody Systems.- Optimal Robot Path Planing.- Topology Optimization of Integral Rib Reinforcement of Plate and Shell Structures with Weighted-sum and Max-min Objectives.- Sensitivity Analysis and Optimization of Finite Element Discretized Structures.- Optimization of the Dynamic Response of Linear Mechanical Systems Using a Multipoint Approximation Technique.- Differentiation ofReliability Functions.- A Constraint- based Approach to the Design and Optimisation of Mechanism Systems.- Multibody Dynamics Optimization by Direct Differentiation Methods Using Object Oriented Programming.- Optimization of Planar Mechanism Kinematics with Symbolic Computation.- Optimization of Structural Parameters and Gaits of a Pipe-Crawling Robot.- Optimization Methods for Parameter Adaption in Mechatronic Systems.- PSI Method and Multi-criteria Optimization of Objects with the Use of Finite Element Models.- Optimal Design of Structures Subject to Nonconservative Forces.- Simulation, Sensitivity Analysis and Optimization of Constrained Multibody Systems with Impacts Based on Mass-Orthogonal Projections.- Parameter Estimation in Discontinuous Descriptor Models.- Some Inverse Problems in Topology Design of Materials and Mechanisms.- The Practical Application of a Dynamic Search-Trajectory Method for Constrained Global Optimization.- Multicriteria Optimal Design of a Dynamically Responsive Safety Chair.- Multicriteria Design of Machines.- Optimum Design of 3-D Truss Structure Considering Control with Stress Constraint at Initial Deformed State.- Application of Continuum Sensitivity Analysis and Optimization to Automobile Structures.- Multibody Model-based Multi-objective Parameter Optimization of Aircraft Landing Gears.- Multicriteria Optimization as a Tool in the Vehicle’s Design Process.- Optimization of High Performance Resilient Machinery Foundations on Ships.- Multiobjective Optimization for Integrated Design of Machine Products Based on Working Environment Information.- Structural Shape Optimization and Convex Programming Methods.- Author Index.

Mer från samma författare

Analyse und Optimierung von Mehrkörpersystemen

D. Bestle

Häftad, 2012

1 079 kr

Mer från samma serie

Introduction to Structural Optimization

Peter W. Christensen, A. Klarbring

Inbunden, 2008

799 kr

Three-Dimensional Elastic Bodies in Rolling Contact

J.J. Kalker

Inbunden, 1990

2 159 kr

Foundations of Solid Mechanics

P. Karasudhi

Inbunden, 1990

2 879 kr

Static and Dynamic Analysis of Structures

J.F. Doyle

Inbunden, 1991

2 879 kr

Del 7

Finite Element Analysis of Composite Laminates

O.O. Ochoa, J.N. Reddy

Inbunden, 1992

1 449 kr

Numerical Fracture Mechanics

M.H. Aliabadi, D.P. Rooke

Inbunden, 1991

3 309 kr

Static and Dynamic Analysis of Structures

J.F. Doyle

Häftad, 1991

2 879 kr

Optimization of Cam Mechanisms

J. Angeles, C.S. López-Cajún

Inbunden, 1991

2 879 kr

Elements of Structural Optimization

Raphael T. Haftka, Zafer Gürdal

Inbunden, 1991

2 019 kr

Elements of Structural Optimization

Raphael T. Haftka, Zafer Gürdal

Häftad, 1991

2 159 kr

Du kanske också är intresserad av

Analyse und Optimierung von Mehrkörpersystemen

D. Bestle

Häftad, 2012

1 079 kr

Applied Dynamics

Werner Schiehlen, Peter Eberhard

Häftad, 2016

729 kr

Ground Vehicle Dynamics

Karl Popp, Werner Schiehlen

Inbunden, 2010

1 449 kr

Del 20

Advanced Multibody System Dynamics

Werner Schiehlen

Häftad, 2010

2 879 kr

Technische Dynamik

Werner Schiehlen, Peter Eberhard

Häftad, 2020

479 kr

Applied Dynamics

Werner Schiehlen, Peter Eberhard

Inbunden, 2014

729 kr

Del 103

Virtual Nonlinear Multibody Systems

Werner Schiehlen, Michael Valásek

Häftad, 2003

1 439 kr

Del 303

Analysis and Estimation of Stochastic Mechanical Systems

Werner Schiehlen, Walter Wedig

Häftad, 1988

729 kr

Del 6

System Dynamics and Long-Term Behaviour of Railway Vehicles, Track and Subgrade

Karl Popp, Werner Schiehlen

Häftad, 2010

4 319 kr

Del 6

System Dynamics and Long-Term Behaviour of Railway Vehicles, Track and Subgrade

Karl Popp, Werner Schiehlen

Inbunden, 2002

4 319 kr

Del 43 i serien Solid Mechanics and Its Applications

IUTAM Symposium on Optimization of Mechanical Systems

Proceedings of the IUTAM Symposium held in Stuttgart, Germany, 26–31 March 1995

Häftad, Engelska, 2011

AvD. Bestle,Werner Schiehlen

729 kr

Beställningsvara. Skickas inom 10-15 vardagar. Fri frakt för medlemmar vid köp för minst 249 kr.

Produktinformation

Utgivningsdatum2011-09-26
Mått160 x 240 x 22 mm
Vikt643 g
FormatHäftad
SpråkEngelska
SerieSolid Mechanics and Its Applications
Antal sidor375
FörlagSpringer
ISBN9789401065559

Tillhör följande kategorier

Decomposition and Sensitivity Analysis for Some Dynamic Problems of Optimal Design.- A Min-Max Problem of Optimal Actuator Placement for Lifting.- Optimization of Structure & Material Properties for Solids Composed of Softening Material.- Multibody Systems Modeling and Optimization Problems of Lower Limb Prostheses.- Multi-criteria Multi-model Design Optimization.- On the Automatic Differentiation of Computer Programs and an Application to Multibody Systems.- Layout of Linear and Nonlinear Structures by Shape and Topology Optimization.- Constrained Control in a Mechanical System with Two Degrees of Freedom.- A New Approach to the Min-Max Dynamic Response Optimization.- Considering Local Buckling Effects for the Optimization of Stiffened Composite Panels.- Optimization of Multibody Systems Using Approximation Concepts.- Optimal Rocking and Damping of a Swing.- An Integrated Strategy for the Control of Complex Mechanical Systems Based on Sub-System Optimality Criteria.- Design Optimization of a Solid Surface Deployable Antenna.- Perimeter Constrained Topology Optimization of Continuum Structures.- Optimization of Laminate Strength.- An Efficient Method for Synthesis of Mechanisms Using an Optimization Method.- Synthesis of Mechanisms Including the Shape of Bodies as Design Variables.- Optimization of a Spatial Transmission Linkage for Heavy Manipulators.- Robust Integrated Design of Controlled Multibody Systems.- Optimal Robot Path Planing.- Topology Optimization of Integral Rib Reinforcement of Plate and Shell Structures with Weighted-sum and Max-min Objectives.- Sensitivity Analysis and Optimization of Finite Element Discretized Structures.- Optimization of the Dynamic Response of Linear Mechanical Systems Using a Multipoint Approximation Technique.- Differentiation ofReliability Functions.- A Constraint- based Approach to the Design and Optimisation of Mechanism Systems.- Multibody Dynamics Optimization by Direct Differentiation Methods Using Object Oriented Programming.- Optimization of Planar Mechanism Kinematics with Symbolic Computation.- Optimization of Structural Parameters and Gaits of a Pipe-Crawling Robot.- Optimization Methods for Parameter Adaption in Mechatronic Systems.- PSI Method and Multi-criteria Optimization of Objects with the Use of Finite Element Models.- Optimal Design of Structures Subject to Nonconservative Forces.- Simulation, Sensitivity Analysis and Optimization of Constrained Multibody Systems with Impacts Based on Mass-Orthogonal Projections.- Parameter Estimation in Discontinuous Descriptor Models.- Some Inverse Problems in Topology Design of Materials and Mechanisms.- The Practical Application of a Dynamic Search-Trajectory Method for Constrained Global Optimization.- Multicriteria Optimal Design of a Dynamically Responsive Safety Chair.- Multicriteria Design of Machines.- Optimum Design of 3-D Truss Structure Considering Control with Stress Constraint at Initial Deformed State.- Application of Continuum Sensitivity Analysis and Optimization to Automobile Structures.- Multibody Model-based Multi-objective Parameter Optimization of Aircraft Landing Gears.- Multicriteria Optimization as a Tool in the Vehicle’s Design Process.- Optimization of High Performance Resilient Machinery Foundations on Ships.- Multiobjective Optimization for Integrated Design of Machine Products Based on Working Environment Information.- Structural Shape Optimization and Convex Programming Methods.- Author Index.