Feodor M. Borodich graduated from Faculty of Mechanics and Mathematics of Moscow State University in 1979. He was awarded Diploma in Mechanics and Applied Mathematics (equiv. to M.Sc.), and later degrees of Candidate of Physical and Mathematical Sciences (equiv. to Ph.D.), and Doctor of Physical and Mathematical Sciences (D.Sc.) by the same University in 1979, 1984 and 1990 respectively. In 2016 he was awarded by Honorary Doctor of Science degree of V.A. Belyi Metal-Polymer Research Institute (DSc Hon), National Academy of Sciences of Belarus for his contribution to Contact Mechanics and Tribology. To improve his knowledge in Engineering, he studied also at Faculty of Constructions of All-Union Extra-Mural Civil Engineering Institute (Open University, Moscow) and he was awarded Diploma with distinction in Civil Engineering (equiv. to MEngSc) in 1985. In 1995 he received a teaching certificate (grade: Professor in Applied Mathematics) from the State Council of Russian Federation for Higher Education. In 2018 he was elected as a Foreign Member of Russian Academy of Natural Sciences (Mining and Metallurgical Section) for his contribution in the field of depth-sensing indentation and testing of material properties, especially in application to coals. In 2001-2003 he was a visiting professor at Northwestern University (USA). Since January 2004 he works as a Professor at Cardiff School of Engineering. Currently he is the Head of Cardiff NANOScience NanoEngineering cross-disciplinary Group (NANOSNEG).Xiaoqing Jin received his B.S. in Engineering Mechanics from Tongji University and M.S. in Solid Mechanics from Tsinghua University in China. Then he went to the United States to continue his pursuit of knowledge in the broad field of solid mechanics under the guidance of Prof. Leon M. Keer. In 2006, he was awarded his Ph.D. in Theoretical and Applied Mechanics from Northwestern University. After that, he worked at the same university as postdoctoral fellow and was then promoted to research associate. In 2013, he returned to China and joined Mechanical Engineering faculty of Chongqing University. The major areas of his research expertise include but are not limited to contact mechanics, fracture mechanics, micromechanics, and tribology. He was named the 2014 recipient of the Captain Alfred E. Hunt Memorial award by the Society of Tribologists and Lubrication Engineers Board of Directors, for authoring the best paper dealing with the field of lubrication or an allied field. He is currently working as a professor in the College of Aerospace Engineering at Chongqing University, and has been appointed chair of the department of Engineering Mechanics since 2018.

• Chapter1.  Adhesion of living cells: Mechanisms of adhesion and contact models (F.M. Borodich,  B.A. Galanov,  L.M. Keer, and M.M. Suarez-Alvarez).- Chapter2. Contact problem in indentation measurements of soft, biological and bioinspired materials. Indentation of soft materials, biological  cells (I. Sokolov ).- Chapter 3. Mechanical properties of the cell surface layer measured by contact atomic force microscopy (M. N. Starodubtseva ).- Chapter4. Capillary adhesion effect in contact interaction of soft materials (I.G. Goryacheva, Yu.Yu. Makhovskaya).-  Chapter 5. Influence of a soft elastic layer on adhesion of rough surfaces (Q. Li, I.A. Lyashenko, R. Pohrt, V.L. Popov ).- Chapter6. Asymptotic modeling scheme for analysis of bio-inspired fibrillar adhesive interfaces — A short review (I. Argatov ).- Chapter 7. Spreading of red caviar cells: The knife-cell and the cell-cell adhesive interactions (F.M. Borodich and S.N. Gorb ).- Chapter 8. Mechanical characterisation of polymeric materials using nanoindentation (H. Gonabadi, A. Yadav and S. Bull ) .- Chapter 9. Indentation tests of biological materials: Theoretical aspects (X. Jin, P. Li and F.M. Borodich ).- Chapter 10. Contact of sliders with viscoelastic solids (E. Torskaya, F. Stepanov ).- Chapter 11. Characterisation of an AFM tip bluntness using indentation of soft materials (S. Baqain, F.M. Borodich, and E. Brousseau ).- Chapter 12.The JKR formalism in applications to problems of adhesive contact (F.M. Borodich ).

Feodor M. Borodich graduated from Faculty of Mechanics and Mathematics of Moscow State University in 1979. He was awarded Diploma in Mechanics and Applied Mathematics (equiv. to M.Sc.), and later degrees of Candidate of Physical and Mathematical Sciences (equiv. to Ph.D.), and Doctor of Physical and Mathematical Sciences (D.Sc.) by the same University in 1979, 1984 and 1990 respectively. In 2016 he was awarded by Honorary Doctor of Science degree of V.A. Belyi Metal-Polymer Research Institute (DSc Hon), National Academy of Sciences of Belarus for his contribution to Contact Mechanics and Tribology. To improve his knowledge in Engineering, he studied also at Faculty of Constructions of All-Union Extra-Mural Civil Engineering Institute (Open University, Moscow) and he was awarded Diploma with distinction in Civil Engineering (equiv. to MEngSc) in 1985. In 1995 he received a teaching certificate (grade: Professor in Applied Mathematics) from the State Council of Russian Federation for Higher Education. In 2018 he was elected as a Foreign Member of Russian Academy of Natural Sciences (Mining and Metallurgical Section) for his contribution in the field of depth-sensing indentation and testing of material properties, especially in application to coals. In 2001-2003 he was a visiting professor at Northwestern University (USA). Since January 2004 he works as a Professor at Cardiff School of Engineering. Currently he is the Head of Cardiff NANOScience NanoEngineering cross-disciplinary Group (NANOSNEG).Xiaoqing Jin received his B.S. in Engineering Mechanics from Tongji University and M.S. in Solid Mechanics from Tsinghua University in China. Then he went to the United States to continue his pursuit of knowledge in the broad field of solid mechanics under the guidance of Prof. Leon M. Keer. In 2006, he was awarded his Ph.D. in Theoretical and Applied Mechanics from Northwestern University. After that, he worked at the same university as postdoctoral fellow and was then promoted to research associate. In 2013, he returned to China and joined Mechanical Engineering faculty of Chongqing University. The major areas of his research expertise include but are not limited to contact mechanics, fracture mechanics, micromechanics, and tribology. He was named the 2014 recipient of the Captain Alfred E. Hunt Memorial award by the Society of Tribologists and Lubrication Engineers Board of Directors, for authoring the best paper dealing with the field of lubrication or an allied field. He is currently working as a professor in the College of Aerospace Engineering at Chongqing University, and has been appointed chair of the department of Engineering Mechanics since 2018.

• Chapter1.  Adhesion of living cells: Mechanisms of adhesion and contact models (F.M. Borodich,  B.A. Galanov,  L.M. Keer, and M.M. Suarez-Alvarez).- Chapter2. Contact problem in indentation measurements of soft, biological and bioinspired materials. Indentation of soft materials, biological  cells (I. Sokolov ).- Chapter 3. Mechanical properties of the cell surface layer measured by contact atomic force microscopy (M. N. Starodubtseva ).- Chapter4. Capillary adhesion effect in contact interaction of soft materials (I.G. Goryacheva, Yu.Yu. Makhovskaya).-  Chapter 5. Influence of a soft elastic layer on adhesion of rough surfaces (Q. Li, I.A. Lyashenko, R. Pohrt, V.L. Popov ).- Chapter6. Asymptotic modeling scheme for analysis of bio-inspired fibrillar adhesive interfaces — A short review (I. Argatov ).- Chapter 7. Spreading of red caviar cells: The knife-cell and the cell-cell adhesive interactions (F.M. Borodich and S.N. Gorb ).- Chapter 8. Mechanical characterisation of polymeric materials using nanoindentation (H. Gonabadi, A. Yadav and S. Bull ) .- Chapter 9. Indentation tests of biological materials: Theoretical aspects (X. Jin, P. Li and F.M. Borodich ).- Chapter 10. Contact of sliders with viscoelastic solids (E. Torskaya, F. Stepanov ).- Chapter 11. Characterisation of an AFM tip bluntness using indentation of soft materials (S. Baqain, F.M. Borodich, and E. Brousseau ).- Chapter 12.The JKR formalism in applications to problems of adhesive contact (F.M. Borodich ).

Feodor M. Borodich graduated from Faculty of Mechanics and Mathematics of Moscow State University in 1979. He was awarded Diploma in Mechanics and Applied Mathematics (equiv. to M.Sc.), and later degrees of Candidate of Physical and Mathematical Sciences (equiv. to Ph.D.), and Doctor of Physical and Mathematical Sciences (D.Sc.) by the same University in 1979, 1984 and 1990 respectively. In 2016 he was awarded by Honorary Doctor of Science degree of V.A. Belyi Metal-Polymer Research Institute (DSc Hon), National Academy of Sciences of Belarus for his contribution to Contact Mechanics and Tribology. To improve his knowledge in Engineering, he studied also at Faculty of Constructions of All-Union Extra-Mural Civil Engineering Institute (Open University, Moscow) and he was awarded Diploma with distinction in Civil Engineering (equiv. to MEngSc) in 1985. In 1995 he received a teaching certificate (grade: Professor in Applied Mathematics) from the State Council of Russian Federation for Higher Education. In 2018 he was elected as a Foreign Member of Russian Academy of Natural Sciences (Mining and Metallurgical Section) for his contribution in the field of depth-sensing indentation and testing of material properties, especially in application to coals. In 2001-2003 he was a visiting professor at Northwestern University (USA). Since January 2004 he works as a Professor at Cardiff School of Engineering. Currently he is the Head of Cardiff NANOScience NanoEngineering cross-disciplinary Group (NANOSNEG).Xiaoqing Jin received his B.S. in Engineering Mechanics from Tongji University and M.S. in Solid Mechanics from Tsinghua University in China. Then he went to the United States to continue his pursuit of knowledge in the broad field of solid mechanics under the guidance of Prof. Leon M. Keer. In 2006, he was awarded his Ph.D. in Theoretical and Applied Mechanics from Northwestern University. After that, he worked at the same university as postdoctoral fellow and was then promoted to research associate. In 2013, he returned to China and joined Mechanical Engineering faculty of Chongqing University. The major areas of his research expertise include but are not limited to contact mechanics, fracture mechanics, micromechanics, and tribology. He was named the 2014 recipient of the Captain Alfred E. Hunt Memorial award by the Society of Tribologists and Lubrication Engineers Board of Directors, for authoring the best paper dealing with the field of lubrication or an allied field. He is currently working as a professor in the College of Aerospace Engineering at Chongqing University, and has been appointed chair of the department of Engineering Mechanics since 2018.

• Chapter1.  Adhesion of living cells: Mechanisms of adhesion and contact models (F.M. Borodich,  B.A. Galanov,  L.M. Keer, and M.M. Suarez-Alvarez).- Chapter2. Contact problem in indentation measurements of soft, biological and bioinspired materials. Indentation of soft materials, biological  cells (I. Sokolov ).- Chapter 3. Mechanical properties of the cell surface layer measured by contact atomic force microscopy (M. N. Starodubtseva ).- Chapter4. Capillary adhesion effect in contact interaction of soft materials (I.G. Goryacheva, Yu.Yu. Makhovskaya).-  Chapter 5. Influence of a soft elastic layer on adhesion of rough surfaces (Q. Li, I.A. Lyashenko, R. Pohrt, V.L. Popov ).- Chapter6. Asymptotic modeling scheme for analysis of bio-inspired fibrillar adhesive interfaces — A short review (I. Argatov ).- Chapter 7. Spreading of red caviar cells: The knife-cell and the cell-cell adhesive interactions (F.M. Borodich and S.N. Gorb ).- Chapter 8. Mechanical characterisation of polymeric materials using nanoindentation (H. Gonabadi, A. Yadav and S. Bull ) .- Chapter 9. Indentation tests of biological materials: Theoretical aspects (X. Jin, P. Li and F.M. Borodich ).- Chapter 10. Contact of sliders with viscoelastic solids (E. Torskaya, F. Stepanov ).- Chapter 11. Characterisation of an AFM tip bluntness using indentation of soft materials (S. Baqain, F.M. Borodich, and E. Brousseau ).- Chapter 12.The JKR formalism in applications to problems of adhesive contact (F.M. Borodich ).