Dr. Vinson is the H. Fletcher Brown Professor of Mechanical and Aerospace Engineering at the University of Delaware. In 1977 he received the ONR-AIAA Structural Mechanics Award for his research in composite materials, and in 1981 he was awarded an ASME Centennial Award. He is active as a consultant to government and industry. He recently received a Fellowship from the Japan Society for the Promotion of Science for 1985. He has been Chairman of the American Organizing Committee for the Japan-United States Conferences on Composite Materials three times (1981, 1983 and 1986). Dr. Sierakowski is Professor and Chairman of the Civil Engineering Department at the Ohio State University. He has held many academic and industrial posts in the United States and has been a National Research Council Senior Research Fellow, a consultant to Air Force Laboratories, and a Visiting Professor at the Air Force Office of Scientific Research.

• 1. Introduction to composite materials.- 1.1 General History.- 1.2 Composite Definition and Classification.- 1.3 Filamentary Type Composition.- 1.4 Composite Manufacture, Fabrication and Processing.- 1.5 Composite Material Behavior.- 1.6 Applications.- 1.7 Bibliography.- 2. Anisotropic Elasticity and laminate theory.- 2.1 Introduction.- 2.2 Derivation of the Anisotropic Elastic Stiffness and compliance Matrices.- 2.3 The Physical Meaning of the Components of the Orthotropic Elasticity Tensor.- 2.4 Thermal and Hygrothermal Considerations.- 2.5 Laminae of Composite Materials.- 2.6 Laminate Analysis.- 2.7 Problems.- 2.8 References.- 3. Plates and panels of composite materials.- 3.1 Introduction.- 3.2 Plate Equilibrium Equations.- 3.3 The Bending of Composite Material Plates.- 3.4 Plate Boundary Conditions.- 3.5 Navier Solutions for Plates of Composite Materials.- 3.6 Navier Solution for a Uniformly Loaded Simply Supported Plate.- 3.7 Levy Solution for Plates of Composite Materials.- 3.8 Perturbation Solutions for the Bending of a Composite Material Plate, with Mid-Plane Symmetry and no Bending-Twisting Coupling.- 3.9 Perturbation Solutions for the Bending of a Composite Material Plate with Bending-Twisting Coupling and Mid-Plane Symmetry.- 3.10 Eigenvalue Problems of Plates of Composite Materials: Natural Vibrations and Elastic Stability.- 3.11 Static and Dynamic Analysis of Plates of Composite Materials Including Transverse Shear Deformation Effects.- 3.12 Some Remarks on Composite Structures.- 3.13 Methods of Analysis for Honeycomb Core Sandwich Panels with Composite Material Faces; and Their Structural Optimization.- 3.14 Concluding Remarks.- 3.15 Problems and Exercises.- 3.16 Bibliography.- 4. Beams, columns and rods of composite materials.- 4.1 Development of a SimpleTheory.- 4.2 Some Simplified Composite Beams Solutions.- 4.3 Bending of Laminated Beams — Advanced Theory.- 4.4 Axial Loading for Simply Supported Beams.- 4.5 Eigenvalue Problems of Beams of Composite Materials: Natural Vibrations and Elastic Stability.- 4.6 Thermoelastic Effects on Beams of Composite Materials.- 4.7 Problems.- 5. Composite material shells.- 5.1 Introduction.- 5.2 History of Composite Material Shells.- 5.3 Analyses of Composite Materials Cylindrical Shells Under Axially Symmetric Loads.- 5.4 A General Solution for Composite Cylindrical Shells Under Axially Symmetric Loads.- 5.5 Response of a Long Axi-Symmetric Laminated Composite Shell to an Edge Displacement.- 5.6 Buckling of Circular Cylindrical Shells of Composite Materials Subjected to Various Loads.- 5.7 Vibration of Composite Shells.- 5.8 Problems and Exercises.- 5.9 References.- 6. Energy methods in composite material structures.- 6.1 Introduction.- 6.2 Theorem of Minimum Potential Energy.- 6.3 Beam Analysis.- 6.4 A Rectangular Composite Material Plate Subjected to Lateral and Hygrothermal Loads.- 6.5 Elastic Stability of Generally Laminated Composite Panels Including Hygrothermal Effects.- 6.6 Theorem of Minimum Potential Energy for a Laminated Composite Cylindrical Shell.- 6.7 Viscoelastic Effects.- 6.8 Problems.- 6.9 References.- 7. Strength and failure theories.- 7.1 Introduction.- 7.2 Failure of Monolithic Isotropic Materials.- 7.3 Anisotropic Strength and Failure Theories.- 7.4 Lamina Strength Theories.- 7.5 Laminate Strength Analysis.- 7.6 Problems.- 7.7 References.- 8. Joining of composite material structures.- 8.1 General Remarks.- 8.2 Adhesive Bonding.- 8.3 Mechanical Fastening.- 8.4 Problems.- 8.5 References.- Appendices.- A-1 Micromechanics.- A-2 Mechanical PropertyCharacterization.- A-3 Answers to Certain problems.- Author Index.

'The book is very well written and well illustrated as well. There are exercises at the end of each chapter which should enhance the book's usefulness as a course text. This book is distinguished from other general books in the field in that it has in-depth coverage of these topics: sandwich plates with composite-material facings; circular cylindrical shells; adhesive and mechanical joints. This book is highly recommended both as a text for courses in structural aspects of composites, as well as for practicing structures engineers and researchers involved with composites. In fact, a copy of it belongs in the library of every composite structures designer, analyst, and researcher.' Journal of Applied Mechanics

Dr. Vinson is the H. Fletcher Brown Professor of Mechanical and Aerospace Engineering at the University of Delaware. In 1977 he received the ONR-AIAA Structural Mechanics Award for his research in composite materials, and in 1981 he was awarded an ASME Centennial Award. He is active as a consultant to government and industry. He recently received a Fellowship from the Japan Society for the Promotion of Science for 1985. He has been Chairman of the American Organizing Committee for the Japan-United States Conferences on Composite Materials three times (1981, 1983 and 1986). Dr. Sierakowski is Professor and Chairman of the Civil Engineering Department at the Ohio State University. He has held many academic and industrial posts in the United States and has been a National Research Council Senior Research Fellow, a consultant to Air Force Laboratories, and a Visiting Professor at the Air Force Office of Scientific Research.

• 1. Introduction to composite materials.- 1.1 General History.- 1.2 Composite Definition and Classification.- 1.3 Filamentary Type Composition.- 1.4 Composite Manufacture, Fabrication and Processing.- 1.5 Composite Material Behavior.- 1.6 Applications.- 1.7 Bibliography.- 2. Anisotropic Elasticity and laminate theory.- 2.1 Introduction.- 2.2 Derivation of the Anisotropic Elastic Stiffness and compliance Matrices.- 2.3 The Physical Meaning of the Components of the Orthotropic Elasticity Tensor.- 2.4 Thermal and Hygrothermal Considerations.- 2.5 Laminae of Composite Materials.- 2.6 Laminate Analysis.- 2.7 Problems.- 2.8 References.- 3. Plates and panels of composite materials.- 3.1 Introduction.- 3.2 Plate Equilibrium Equations.- 3.3 The Bending of Composite Material Plates.- 3.4 Plate Boundary Conditions.- 3.5 Navier Solutions for Plates of Composite Materials.- 3.6 Navier Solution for a Uniformly Loaded Simply Supported Plate.- 3.7 Levy Solution for Plates of Composite Materials.- 3.8 Perturbation Solutions for the Bending of a Composite Material Plate, with Mid-Plane Symmetry and no Bending-Twisting Coupling.- 3.9 Perturbation Solutions for the Bending of a Composite Material Plate with Bending-Twisting Coupling and Mid-Plane Symmetry.- 3.10 Eigenvalue Problems of Plates of Composite Materials: Natural Vibrations and Elastic Stability.- 3.11 Static and Dynamic Analysis of Plates of Composite Materials Including Transverse Shear Deformation Effects.- 3.12 Some Remarks on Composite Structures.- 3.13 Methods of Analysis for Honeycomb Core Sandwich Panels with Composite Material Faces; and Their Structural Optimization.- 3.14 Concluding Remarks.- 3.15 Problems and Exercises.- 3.16 Bibliography.- 4. Beams, columns and rods of composite materials.- 4.1 Development of a SimpleTheory.- 4.2 Some Simplified Composite Beams Solutions.- 4.3 Bending of Laminated Beams — Advanced Theory.- 4.4 Axial Loading for Simply Supported Beams.- 4.5 Eigenvalue Problems of Beams of Composite Materials: Natural Vibrations and Elastic Stability.- 4.6 Thermoelastic Effects on Beams of Composite Materials.- 4.7 Problems.- 5. Composite material shells.- 5.1 Introduction.- 5.2 History of Composite Material Shells.- 5.3 Analyses of Composite Materials Cylindrical Shells Under Axially Symmetric Loads.- 5.4 A General Solution for Composite Cylindrical Shells Under Axially Symmetric Loads.- 5.5 Response of a Long Axi-Symmetric Laminated Composite Shell to an Edge Displacement.- 5.6 Buckling of Circular Cylindrical Shells of Composite Materials Subjected to Various Loads.- 5.7 Vibration of Composite Shells.- 5.8 Problems and Exercises.- 5.9 References.- 6. Energy methods in composite material structures.- 6.1 Introduction.- 6.2 Theorem of Minimum Potential Energy.- 6.3 Beam Analysis.- 6.4 A Rectangular Composite Material Plate Subjected to Lateral and Hygrothermal Loads.- 6.5 Elastic Stability of Generally Laminated Composite Panels Including Hygrothermal Effects.- 6.6 Theorem of Minimum Potential Energy for a Laminated Composite Cylindrical Shell.- 6.7 Viscoelastic Effects.- 6.8 Problems.- 6.9 References.- 7. Strength and failure theories.- 7.1 Introduction.- 7.2 Failure of Monolithic Isotropic Materials.- 7.3 Anisotropic Strength and Failure Theories.- 7.4 Lamina Strength Theories.- 7.5 Laminate Strength Analysis.- 7.6 Problems.- 7.7 References.- 8. Joining of composite material structures.- 8.1 General Remarks.- 8.2 Adhesive Bonding.- 8.3 Mechanical Fastening.- 8.4 Problems.- 8.5 References.- Appendices.- A-1 Micromechanics.- A-2 Mechanical PropertyCharacterization.- A-3 Answers to Certain problems.- Author Index.

'The book is very well written and well illustrated as well. There are exercises at the end of each chapter which should enhance the book's usefulness as a course text. This book is distinguished from other general books in the field in that it has in-depth coverage of these topics: sandwich plates with composite-material facings; circular cylindrical shells; adhesive and mechanical joints. This book is highly recommended both as a text for courses in structural aspects of composites, as well as for practicing structures engineers and researchers involved with composites. In fact, a copy of it belongs in the library of every composite structures designer, analyst, and researcher.' Journal of Applied Mechanics

Dr. Vinson is the H. Fletcher Brown Professor of Mechanical and Aerospace Engineering at the University of Delaware. In 1977 he received the ONR-AIAA Structural Mechanics Award for his research in composite materials, and in 1981 he was awarded an ASME Centennial Award. He is active as a consultant to government and industry. He recently received a Fellowship from the Japan Society for the Promotion of Science for 1985. He has been Chairman of the American Organizing Committee for the Japan-United States Conferences on Composite Materials three times (1981, 1983 and 1986). Dr. Sierakowski is Professor and Chairman of the Civil Engineering Department at the Ohio State University. He has held many academic and industrial posts in the United States and has been a National Research Council Senior Research Fellow, a consultant to Air Force Laboratories, and a Visiting Professor at the Air Force Office of Scientific Research.

• 1. Introduction to composite materials.- 1.1 General History.- 1.2 Composite Definition and Classification.- 1.3 Filamentary Type Composition.- 1.4 Composite Manufacture, Fabrication and Processing.- 1.5 Composite Material Behavior.- 1.6 Applications.- 1.7 Bibliography.- 2. Anisotropic Elasticity and laminate theory.- 2.1 Introduction.- 2.2 Derivation of the Anisotropic Elastic Stiffness and compliance Matrices.- 2.3 The Physical Meaning of the Components of the Orthotropic Elasticity Tensor.- 2.4 Thermal and Hygrothermal Considerations.- 2.5 Laminae of Composite Materials.- 2.6 Laminate Analysis.- 2.7 Problems.- 2.8 References.- 3. Plates and panels of composite materials.- 3.1 Introduction.- 3.2 Plate Equilibrium Equations.- 3.3 The Bending of Composite Material Plates.- 3.4 Plate Boundary Conditions.- 3.5 Navier Solutions for Plates of Composite Materials.- 3.6 Navier Solution for a Uniformly Loaded Simply Supported Plate.- 3.7 Levy Solution for Plates of Composite Materials.- 3.8 Perturbation Solutions for the Bending of a Composite Material Plate, with Mid-Plane Symmetry and no Bending-Twisting Coupling.- 3.9 Perturbation Solutions for the Bending of a Composite Material Plate with Bending-Twisting Coupling and Mid-Plane Symmetry.- 3.10 Eigenvalue Problems of Plates of Composite Materials: Natural Vibrations and Elastic Stability.- 3.11 Static and Dynamic Analysis of Plates of Composite Materials Including Transverse Shear Deformation Effects.- 3.12 Some Remarks on Composite Structures.- 3.13 Methods of Analysis for Honeycomb Core Sandwich Panels with Composite Material Faces; and Their Structural Optimization.- 3.14 Concluding Remarks.- 3.15 Problems and Exercises.- 3.16 Bibliography.- 4. Beams, columns and rods of composite materials.- 4.1 Development of a SimpleTheory.- 4.2 Some Simplified Composite Beams Solutions.- 4.3 Bending of Laminated Beams — Advanced Theory.- 4.4 Axial Loading for Simply Supported Beams.- 4.5 Eigenvalue Problems of Beams of Composite Materials: Natural Vibrations and Elastic Stability.- 4.6 Thermoelastic Effects on Beams of Composite Materials.- 4.7 Problems.- 5. Composite material shells.- 5.1 Introduction.- 5.2 History of Composite Material Shells.- 5.3 Analyses of Composite Materials Cylindrical Shells Under Axially Symmetric Loads.- 5.4 A General Solution for Composite Cylindrical Shells Under Axially Symmetric Loads.- 5.5 Response of a Long Axi-Symmetric Laminated Composite Shell to an Edge Displacement.- 5.6 Buckling of Circular Cylindrical Shells of Composite Materials Subjected to Various Loads.- 5.7 Vibration of Composite Shells.- 5.8 Problems and Exercises.- 5.9 References.- 6. Energy methods in composite material structures.- 6.1 Introduction.- 6.2 Theorem of Minimum Potential Energy.- 6.3 Beam Analysis.- 6.4 A Rectangular Composite Material Plate Subjected to Lateral and Hygrothermal Loads.- 6.5 Elastic Stability of Generally Laminated Composite Panels Including Hygrothermal Effects.- 6.6 Theorem of Minimum Potential Energy for a Laminated Composite Cylindrical Shell.- 6.7 Viscoelastic Effects.- 6.8 Problems.- 6.9 References.- 7. Strength and failure theories.- 7.1 Introduction.- 7.2 Failure of Monolithic Isotropic Materials.- 7.3 Anisotropic Strength and Failure Theories.- 7.4 Lamina Strength Theories.- 7.5 Laminate Strength Analysis.- 7.6 Problems.- 7.7 References.- 8. Joining of composite material structures.- 8.1 General Remarks.- 8.2 Adhesive Bonding.- 8.3 Mechanical Fastening.- 8.4 Problems.- 8.5 References.- Appendices.- A-1 Micromechanics.- A-2 Mechanical PropertyCharacterization.- A-3 Answers to Certain problems.- Author Index.

'The book is very well written and well illustrated as well. There are exercises at the end of each chapter which should enhance the book's usefulness as a course text. This book is distinguished from other general books in the field in that it has in-depth coverage of these topics: sandwich plates with composite-material facings; circular cylindrical shells; adhesive and mechanical joints. This book is highly recommended both as a text for courses in structural aspects of composites, as well as for practicing structures engineers and researchers involved with composites. In fact, a copy of it belongs in the library of every composite structures designer, analyst, and researcher.' Journal of Applied Mechanics