Hoppa till sidans huvudinnehåll

2 169 kr

Beställningsvara. Skickas inom 7-10 vardagar. Fri frakt för medlemmar vid köp för minst 249 kr.

Advanced Processing, Properties, and Applications of Starch and Other Bio-based Polymers presents the latest cutting-edge research into the processing and applications of bio-based polymers, for novel industrial applications across areas including biomedical and electronics. The book is divided into three sections, covering processing and manufacture, properties, and applications. Throughout the book, key aspects of sustainability are considered, including improved utilization of available natural resources, sustainable design possibilities, cleaner production processes, and waste management.



  • Focuses on starch-based polymers, examining the latest advances in processing and applications with this valuable category of biopolymer
  • Highlights industrial sustainability considerations at all steps of the process, including when sourcing materials, designing and producing products, and dealing with waste
  • Supports the processing and development of starch and other bio-based polymers with enhanced functionality for advanced applications

Produktinformation

  • Utgivningsdatum2020-07-31
  • Mått191 x 235 x 20 mm
  • Vikt480 g
  • FormatHäftad
  • SpråkEngelska
  • Antal sidor230
  • FörlagElsevier Science
  • ISBN9780128196618

Tillhör följande kategorier

Hoppa över listan

Du kanske också är intresserad av

Roselle

S. M. Sapuan, Nadlene Razali, A.M. Radzi, R.A. Ilyas, Malaysia) Sapuan, S. M., MSc, PhD (Professor of Composite Materials, Advanced Engineering Materials and Composites Research Centre (AEMC), Department of Mechanical and Manufacturing Engineering, Universiti Putra Malaysia, Malaysia) Razali, Nadlene (Department of Mechanical and Manufacturing Engineering, UniversitiTeknikal Malaysia, Melaka, Malaysia) Radzi, A.M. (Institute of Tropical Forestry and Forest Products, Universiti Putra Malaysia, Selangor, Malaysia) Ilyas, R.A. (Senior Lecturer, School of Chemical and Energy Engineering, Faculty of Engineering; Center for Advanced Composite Materials (CACM), Universiti Teknologi Malaysia, Johor Bahru, Johor, S M Sapuan, A M Radzi, R A Ilyas

Häftad

1 309 kr

Lignocellulose for Future Bioeconomy

Hidayah Ariffin, S. M. Sapuan, Mohd Ali Hassan, Universiti Putra Malaysia) Ariffin, Hidayah (Laboratory of Biopolymer and Derivates, Malaysia) Sapuan, S. M., MSc, PhD (Professor of Composite Materials, Advanced Engineering Materials and Composites Research Centre (AEMC), Department of Mechanical and Manufacturing Engineering, Universiti Putra Malaysia, Universiti Putra Malaysia) Hassan, Mohd Ali (Department of Bioprocess Technologies

Häftad

3 189 kr

Advanced Cutting and Machining Processes for Composites and Biocomposites

S. M. Sapuan, MKA M Ariffin, Yusoff Nukman, Emin Bayraktar, Fathi Masoud, Denizhan Yavas, Denizhan Yavaş, Malaysia) Sapuan, S. M., MSc, PhD (Professor of Composite Materials, Advanced Engineering Materials and Composites Research Centre (AEMC), Department of Mechanical and Manufacturing Engineering, Universiti Putra Malaysia, Malaysia) M Ariffin, MKA (Professor, Department of Mechanical and Manufacturing Engineering, Universiti Putra Malaysia, Selangor, Malaysia) Nukman, Yusoff, PhD (Professor, Department of Mechanical Engineering, University of Malaya, Kuala Lumpur, France) Bayraktar, Emin, DSc, PhD (Professor, ISAE-SUPMECA-School of Mechanical and Manufacturing Engineering, Paris, Saint Ouen, Malaysia) Masoud, Fathi (Research Assistant, Department of Mechanical and Manufacturing Engineering, Universiti Putra Malaysia, Selangor, USA) Yavas, Denizhan, PhD (Assistant Professor, Mechanical Engineering Department, Rice University, Houston, TX, Mka M. Ariffin, S M Sapuan, Mka M Ariffin, Yava&

Häftad

3 379 kr

Hole-Making and Drilling Technology for Composites

Ahmad Baharuddin Abdullah, S. M. Sapuan, Malaysia) Abdullah, Ahmad Baharuddin (Associate Professor, Mechanical Engineering, Universiti Sains Malaysia, Penang, Malaysia) Sapuan, S. M., MSc, PhD (Professor of Composite Materials, Advanced Engineering Materials and Composites Research Centre (AEMC), Department of Mechanical and Manufacturing Engineering, Universiti Putra Malaysia

Häftad

2 839 kr

Polymer Composites Derived from Animal Sources

S. M. Sapuan, C. H. Azhari, N. M. Nurazzi, Malaysia) Sapuan, S. M., MSc, PhD (Professor of Composite Materials, Advanced Engineering Materials and Composites Research Centre (AEMC), Department of Mechanical and Manufacturing Engineering, Universiti Putra Malaysia, Malaysia.) Azhari, C. H. (Emeritus Professor, Department of Mechanical and Materials Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, Bangi, Selangor, Malaysia) Nurazzi, N. M. (Bioresource Technology Division, School of Industrial Technology, Universiti Sains Malaysia, Penang, S M Sapuan, C H Azhari, N M Nurazzi

Häftad

2 999 kr

Pulping and Papermaking of Nonwood Plant Fibers

Z.M.A. Ainun, S. M. Sapuan, R.A. Ilyas, Malaysia) Ainun, Z.M.A. (Program of Pulp and Paper and Pollution Control, Laboratory of Biopolymer and Derivatives, Institute of Tropical Forest and Forest Products (INTROP), Universiti Putra Malaysia, Selangor, Malaysia) Sapuan, S. M., MSc, PhD (Professor of Composite Materials, Advanced Engineering Materials and Composites Research Centre (AEMC), Department of Mechanical and Manufacturing Engineering, Universiti Putra Malaysia, Malaysia) Ilyas, R.A. (Senior Lecturer, School of Chemical and Energy Engineering, Faculty of Engineering; Center for Advanced Composite Materials (CACM), Universiti Teknologi Malaysia, Johor Bahru, Johor

Häftad

2 079 kr

Natural Fiber Reinforced Vinyl Ester and Vinyl Polymer Composites

S. M. Sapuan, H. Ismail, E.S. Zainudin, Malaysia) Sapuan, S. M., MSc, PhD (Professor of Composite Materials, Advanced Engineering Materials and Composites Research Centre (AEMC), Department of Mechanical and Manufacturing Engineering, Universiti Putra Malaysia, Malaysia) Ismail, H. (Professor of Polymer Engineering, Universiti Sains Malaysia, Malaysia) Zainudin, E.S. (Associate Professor of Mechanical and Manufacturing Engineering, Universiti Putra Malaysia, Serdang

Häftad

3 529 kr

Bamboo-Based Polymer Composites

Nurazzi,N. M, N. M. Nurazzi, S. M. Sapuan, Mohd Nor Faiz Norrrahim, Malaysia) Nurazzi, N. M. (Bioresource Technology Division, School of Industrial Technology, Universiti Sains Malaysia, Penang, Malaysia) Sapuan, S. M., MSc, PhD (Professor of Composite Materials, Advanced Engineering Materials and Composites Research Centre (AEMC), Department of Mechanical and Manufacturing Engineering, Universiti Putra Malaysia, Malaysia) Norrrahim, Mohd Nor Faiz (Postdoctoral Fellow, Research Center for Chemical Defence (CHEMDEF), National Defence University of Malaysia (UPNM), Kem Perdana Sungai Besi, Kuala Lumpur

Häftad

3 149 kr

Oil Palm Biomass for Composite Panels

S. M. Sapuan, M.T. Paridah, Saifulazry S O A, Lee S H, Malaysia) Sapuan, S. M., MSc, PhD (Professor of Composite Materials, Advanced Engineering Materials and Composites Research Centre (AEMC), Department of Mechanical and Manufacturing Engineering, Universiti Putra Malaysia, Malaysia) Paridah, M.T. (Professor of Wood Adhesives and Finishing, Institute of Tropical Forestry and Forest Products (INTROP), Universiti Putra Malaysia, Serdang, Selangor, Malaysia) S O A, Saifulazry (Senior Researcher, Laboratory of Biocomposite Technology, Institute of Tropical Forestry and Forest Products (INTROP), Universiti Putra Malaysia, Serdang, Selangor, Malaysia) S H, Lee (Senior Lecturer, Department of Wood Industries, Faculty of Applied Sciences, Universiti Teknologi MARA Pahang Branch Campus Jengka, Pahang, M. T. Paridah

Häftad

2 529 kr