Advanced Ceramic Coatings and Materials for Extreme Environments, Volume 32, Issue 3

Dr. Dongming Zhu is a senior materials research engineer at NASA Glenn Research Center. He is an internationally recognized leader in the area of turbine engine coating technology with over 15 years of professional experience. He has led the development of new environmental barrier coatings for future generations of turbine engines, and he has also led the development of advanced laboratory test techniques for evaluating performance of advanced turbine engine coatings. He received his B.S. and M.S. degrees in Materials Science and Engineering from Hefei University of Technology, Hefei, China. He received his Ph.D. in Chemical Engineering and Materials Science from the University of Minnesota.   Hua-Tay Lin currently is a Distinguished Professor of Guangdong University of Technology, Guangzhou, China, and the Editor-in-Chief of the International Journal of Applied Ceramic Technology. He is Academician of World Academy of Ceramic, and Fellow of ASM International and the American Ceramic Society. His researches mainly focus on mechanical reliability of advanced ceramic components and electronic devices, high-temperature mechanical performance of ceramics and composites, and engineering design of microstructure and properties of ceramics and composites for clean energy and energy efficiency technologies, and coatings.   Yanchun Zhou holds a BSc in ceramics from Tsinghua University, and a M.S. in ceramics and Ph.D. in metals from Institute of Metal Research, Chinese Academy of Sciences. He was a visiting scientist at the Institute of Strength Physics and Materials, Russian Academy of Sciences, and a post doctoral associate at University of Missouri-Rolla in the 1990’s. He was Professor and Director of High-performance Ceramic Division, Shenyang National Laboratory for Materials Science before moving to Aerospace Research Institute of Materials and Processing Technology in 2010. He has published more than 400 papers in peer-reviewed international journals with citations of ca 11000 times and H-index of 55.

• Preface ix Introduction xiADVANCED COATING CHARCTERIZATION METHODSAND NON-DESTRUCTIVE EVALUATIONMonitoring Delamination of Thermal Barrier Coatings during Interrupted High-Heat-Flux Laser Testing using Upconversion Luminescence Imaging 3Jeffrey I. Eldridge and Dongming Zhu, and Douglas E. WolfeThermal Imaging Measurement Accuracy for Thermal Properties of Thermal Barrier Coatings 15J. G. SunADVANCED COATING PROCESSING AND NANOSTRUCTURED COATING SYSTEMSHigh Velocity Suspension Flame Sprayed (HVSFS) Hydroxyapatite Coatings for Biomedical Applications 25N. Stiegler, R. Gadow, and A. KillingerCOATINGS TO RESIST WEAR, EROSION, AND TRIBOLOGICAL LOADINGSCeramic/Metal-Polymer Multilayered Coatings for Tribological Applications Under Dry Sliding Conditions 39A. Rempp, M. Widmann, P. Guth, A. Killinger, and R. GadowApplication of HVOF for High Performance Cylinder Liner Coatings 51A. Manzat, A. Killinger, and R. GadowMultilayer Coatings for Anti-Corrosion Applications 59L. Lin, C. Qu, R. Kasica, Q. Fang, R. E. Miller, E. Pierce, E. Mccarty, J. H. Fan, D. D. Edwards, G. Wynick, and X. W. WangENVIRONMENTAL BARRIER COATINGS FOR TURBINE ENGINES AND EXTREME ENVIRONMENTSPlasma Spray-Physical Vapor Deposition (PS-PVD) of Ceramics for Protective Coatings 73B. J. Harder and D. ZhuAn Yb2Si2O7 Oxidation Resistance Coating for C/C Composites by Supersonic Plasma Spray 85Lingjun Guo, Minna Han, Hejun Li, Kezhi Li, and Qiangang FuFUNCTIONALLY GRADED COATINGS AND INTERFACESDevelopment of Oxide Ceramic APS Coatings for Microwave Absorption 93M. Floristän, P. Müller, A. Gebhardt, A. Killinger, R. Gadow, A. Cardella, and C. LiTHERMAL BARRIER COATINGSHot Corrosion of Potential Thermal Barrier Coating Material (Sm1-xYbx)2Zr2O7 by V205 and Na2SO4 109Jia-Hu Ouyang, Sa Li, Zhan-Guo Liu, and Yu ZhouVariation of Creep Properties and Interfacial Roughness in Thermal Barrier Coating Systems 129P. Seiler, M. Baker, and J. RosierMATERIALS FOR EXTREME ENVIRONMENTS: ULTRA HIGH TEMPERATURE CERAMICS (UHTCS) AND NANOLAMINATED TERNARY CARBIDES AND NITRIDES (MAX PHASES)Temperature and Strain-Rate Dependent Plasticity of ZrB2 Composites from Hardness Measurements 139J. Wang, F. Giuliani, and L.J. VandeperreNano-Crystalline Ultra High Temperature HfB2 and HfC Powders and Coatings Using a Sol-Gel Approach 151S. Venugopal, A. Paul, B. Vaidhyanathan, J. Binner, A. Heaton, and P. BrownPressureless Sintering and Hot-Pressing of Ti2AIN Powders Obtained by SHS Process 161L. Chlubny, J. Lis, M. M. Bucko, and D. KataDiffraction Study of Self-Recovery in Decomposed AI2Ti05 during Vacuum Annealing 169I. M. Low and W. K. PangKinetics of Phase Decomposition in Ti4AIN3 and Ti2AIN--A Comparative Diffraction Study 177W. K. Pang, R. I. Smith, V. K. Peterson, and I. M. LowAuthor Index 187