Hoppa till sidans huvudinnehåll

3 529 kr

Beställningsvara. Skickas inom 7-10 vardagar. Fri frakt för medlemmar vid köp för minst 249 kr.

Additive Manufacturing of Magnetic Materials: Techniques, Materials, Applications, Opportunities and Challenges outlines different 3D printing techniques that can be employed to create an array of different magnetic materials, along with how these materials can be effectively applied. The book discusses the additive manufacturing (AM) of soft magnets, permanent (hard) magnets, 4D magnetic shape memory alloys, magnetocaloric materials, and rare earth based magnetic alloys. Different AM techniques are covered, including laser powder bed fusion, directed laser deposition, binder jetting, cold spray, and the different influences of these techniques on the microstructure of the material produced.

Common challenges are highlighted with solutions also provided, and applications covered include magnetic shielding, actuators, sensors, robotics, and magnetic heat exchangers for solid state heat pumps.

  • Presents various additive manufacturing techniques, the different types of magnetic materials produced, and their applications
  • Discusses soft and permanent (hard) magnets, 4D magnetic shape memory alloys, magnetocaloric materials, and rare earth based magnetic alloys
  • Highlights the common microstructural defects associated with different manufacturing techniques
  • Covers applications such as magnetic shielding, actuators, sensors, robotics, and magnetic heat exchangers for solid state heat pumps

Produktinformation

Tillhör följande kategorier

Hoppa över listan

Mer från samma serie

Multiscale Modeling of Additively Manufactured Metals

Yi Zhang, Yeon-Gil Jung, Jing Zhang, Inc) Zhang, Yi (Ansys, Republic of Korea) Jung, Yeon-Gil (School of Materials Science and Engineering, Changwon National University, USA) Zhang, Jing (Department of Mechanical and Energy Engineering, Indiana University - Purdue University Indianapolis

Häftad

2 039 kr

3D Printing in Biotechnology

Nandita Dasgupta, Vineeta Singh, Shivendu Ranjan, Taijshee Mishra, Bhartendu Nath Mishra, India) Dasgupta, Nandita (LV Prasad Eye Institute, Bhubaneswar, Lucknow) Singh, Vineeta (Department of Biotechnology, Institute of Engineering and Technology, Kharagpur) Ranjan, Shivendu (School of Nano Science and Technology (SNST), Indian Institute of Technology, Government of India) Mishra, Taijshee (Consultant, NITI Aayog, Lucknow) Mishra, Bhartendu Nath (Department of Biotechnology, Institute of Engineering and Technology

Häftad

2 069 kr

4D Printing

Rupinder Singh, India) Singh, Rupinder (Professor and Head, Department of Mechanical Engineering, National Institute of Technical Teacher Training and Research, Chandigarh

Häftad

1 769 kr

Laser Additive Manufacturing of Metallic Materials and Components

Dongdong Gu, China) Gu, Dongdong (Full Professor, College of Materials Science and Technology, Nanjing University of Aeronautics and Astronautics (NUAA), China; Director, Jiangsu Provincial Engineering Laboratory for Laser Additive Manufacturing of High-Performance Metallic Components

Häftad

2 989 kr

Smart Materials in Additive Manufacturing, volume 1: 4D Printing Principles and Fabrication

Mahdi Bodaghi, Ali Zolfagharian, UK) Bodaghi, Mahdi, BSc, MSc, PhD, PGCAP, FHEA, CEng, MIMechE (Senior Lecturer, Department of Engineering, School of Science and Technology, Nottingham Trent University, Australia.) Zolfagharian, Ali, BSc, MSc, PhD, ADPRF, GCHE (Senior Lecturer in the Faculty of Science, Engineering and Built Environment, School of Engineering at Deakin University

Häftad

2 759 kr

Fundamentals of Laser Powder Bed Fusion of Metals

Igor Yadroitsev, Ina Yadroitsava, Anton Du Plessis, Eric MacDonald, South Africa) Yadroitsev, Igor (Research Chair, Department of Mechanical and Mechatronic Engineering, Central University of Technology, Bloemfontein, Free State, South Africa) Yadroitsava, Ina (Senior Researcher, Department of Mechanical and Mechatronic Engineering, Central University of Technology, Bloemfontein, Free State, South Africa) Du Plessis, Anton (Applications Scientist, Object Research Systems Inc, Montreal, Quebec, Canada; Associate Professor, Research Group 3D Innovation, Stellenbosch University, Stellenbosch, Western Cape, USA) MacDonald, Eric (Professor and Murchison Chair, W. M. Keck Center for 3D Innovation, University of Texas at El Paso, El Paso, Texas

Häftad

2 289 kr

Additive Manufacturing of Glass

Bastian E. Rapp, Frederik Kotz-Helmer, Germany) Rapp, Bastian E. (Head of Group, Institute of Microstructure Technology (IMT), Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany) Kotz-Helmer, Frederik (Laboratory of Process Technology, Department of Microsystems Engineering (IMTEK), University of Freiburg

Häftad

2 379 kr

Hoppa över listan

Du kanske också är intresserad av

Additively Manufactured Smart Materials and Structures

Velu,Rajkuma, Rajkumar Velu, Kalim Deshmukh, Inigo Flores Ituarte, Anand Kumar Subramaniyan, India) Velu, Rajkumar (Additive Manufacturing Research Laboratory, Department of Mechanical Engineering, Indian Institute of Technology Jammu, J&K, Czech Republic) Deshmukh, Kalim (Senior Researcher, New Technologies - Research Centre, University of West Bohemia, Finland) Ituarte, Inigo Flores (Automation Technology and Mechanical Engineering, Faculty of Engineering and Natural Sciences, Tampere University, India) Subramaniyan, Anand Kumar (Indian Institute of Technology Jammu, J&K

Häftad

3 979 kr

Smart Materials in Additive Manufacturing, volume 1: 4D Printing Principles and Fabrication

Mahdi Bodaghi, Ali Zolfagharian, UK) Bodaghi, Mahdi, BSc, MSc, PhD, PGCAP, FHEA, CEng, MIMechE (Senior Lecturer, Department of Engineering, School of Science and Technology, Nottingham Trent University, Australia.) Zolfagharian, Ali, BSc, MSc, PhD, ADPRF, GCHE (Senior Lecturer in the Faculty of Science, Engineering and Built Environment, School of Engineering at Deakin University

Häftad

2 759 kr

3D Printing in Biotechnology

Nandita Dasgupta, Vineeta Singh, Shivendu Ranjan, Taijshee Mishra, Bhartendu Nath Mishra, India) Dasgupta, Nandita (LV Prasad Eye Institute, Bhubaneswar, Lucknow) Singh, Vineeta (Department of Biotechnology, Institute of Engineering and Technology, Kharagpur) Ranjan, Shivendu (School of Nano Science and Technology (SNST), Indian Institute of Technology, Government of India) Mishra, Taijshee (Consultant, NITI Aayog, Lucknow) Mishra, Bhartendu Nath (Department of Biotechnology, Institute of Engineering and Technology

Häftad

2 069 kr

Fundamentals of Laser Powder Bed Fusion of Metals

Igor Yadroitsev, Ina Yadroitsava, Anton Du Plessis, Eric MacDonald, South Africa) Yadroitsev, Igor (Research Chair, Department of Mechanical and Mechatronic Engineering, Central University of Technology, Bloemfontein, Free State, South Africa) Yadroitsava, Ina (Senior Researcher, Department of Mechanical and Mechatronic Engineering, Central University of Technology, Bloemfontein, Free State, South Africa) Du Plessis, Anton (Applications Scientist, Object Research Systems Inc, Montreal, Quebec, Canada; Associate Professor, Research Group 3D Innovation, Stellenbosch University, Stellenbosch, Western Cape, USA) MacDonald, Eric (Professor and Murchison Chair, W. M. Keck Center for 3D Innovation, University of Texas at El Paso, El Paso, Texas

Häftad

2 289 kr

Advances in Additive Manufacturing

Ravi Kant Mittal, Abid Haleem, Ajay Kumar, UAE.) Mittal, Ravi Kant, B.E. (Hons.) & M.E., Mechanical Engineering, and Ph.D. degrees from BITS Pilani, India (Retired Senior Professor, Birla Institute of Technology and Science, Pilani, India. Former Director of the offshore campus of BITS Pilani at Dubai, India) Haleem, Abid (Professor of Mechanical Engineering, Jamia Millia Islamia (A Central University by an Act of Parliament) in New Delhi, India) Kumar, Ajay (Professor (Research Track), Department of Mechanical Engineering, School of Core Engineering, Faculty of Science, Technology & Architecture, Manipal University Jaipur

Häftad

2 379 kr

Additive Manufacturing of Glass

Bastian E. Rapp, Frederik Kotz-Helmer, Germany) Rapp, Bastian E. (Head of Group, Institute of Microstructure Technology (IMT), Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany) Kotz-Helmer, Frederik (Laboratory of Process Technology, Department of Microsystems Engineering (IMTEK), University of Freiburg

Häftad

2 379 kr