Del 48 i serien Tribology and Interface Engineering

Life Cycle Tribology

31st Leeds-Lyon Tribology Symposium

Inbunden, Engelska, 2005

AvDuncan Dowson,M. Priest,G. Dalmaz,A A Lubrecht

5 189 kr

Beställningsvara. Skickas inom 10-15 vardagar. Fri frakt för medlemmar vid köp för minst 249 kr.

The 31st Leeds-Lyon Symposium on Tribology was held at Trinity and All Saints College in Leeds under the title "Life Cycle Tribology" from Tuesday 7th September until Friday 10th September 2004. Over the three days of presentations that followed, life cycle tribology was explored across a range of areas including automotive tribology, bearings, bio-degradability and sustainability, bio-tribology, coatings, condition monitoring, contact mechanics, debris effects, elastohydrodynamic lubrication, lubricants, machine systems, nanotribology, rolling contact fatigue, transmissions, tribochemistry and wear and failure. Invited talks in these fields were presented by leading international researchers and practitioners, namely C.J. Hooke, J.A. Williams, R.J.K. Wood, G. Isaac, S.C. Tung, D. Price, I. Sherrington, M. Hadfield, K. Kato, R.I. Taylor, H.P. Evans, R.S. Dwyer-Joyce and H. Rahnejat.

Produktinformation

Utgivningsdatum2005-10-13
Mått192 x 262 x 0 mm
Vikt2 320 g
FormatInbunden
SpråkEngelska
SerieTribology and Interface Engineering
Antal sidor900
FörlagElsevier Science
ISBN9780444516879

Tillhör följande kategorier

Maskinteknik och material inom Naturvetenskap och teknik

IntroductionA Short History and Summary of Publication Arrangements for the Leeds/Lyon Symposia on Tribology; Symposia-1-31, (1974-2004)RefereeingSession I: Keynote AddressesTechnology of a Traction Drive CVT - Past, Present And FutureLife Cycle Engineering and Virtual Product Development – the Role of TribologySession II: Elastohydrodynamic Lubrication 1The effect of roughness in EHL contactsComplete numerical analysis for mixed boundary and thermal elastohydrodynamic lubrication in steady-state point contactsThe influence of slide-to-roll ratio on lubricant film thickness distribution in the vicinity of real roughness features passing through EHD point contactUnsteady EHL: An inverse hydrodynamic formulationSession III: Nanotribology 1Some aspects of tribological behaviour at the micro-scale – with particular reference to MEMS and MMAsChain matching effects of base oils and additives in nanotribology of boundary filmsLubrication properties of AI2O3 nanoparticles in aqueous suspensionsSession IV: Lubricants 1Electrostatic monitoring of the effects of carbon black on lubricated steel/steel sliding contactsEvaluation of Ionic Liquids for the Application as LubricantsMeasurement method of physical properties of adsorbed layersEffectiveness of boundary lubricant additives on some coated surfacesSession V: Bio-Tribology 1Life Cycle Aspects of Total Replacement Hip JointsEvaluation of wear resistance of ultra-high molecular weight polyethylene for joint prostheses in the multi-directional pin-on-plate testerThe influences of lipid and protein concentration on wear of ultra-high molecular weight polyethyleneWear process under concentrated contact in alumina/alumina hip jointSession VI: Coatings 1An In-Situ Tribotest Method Designed for Predicting Wear Life and Frictional Performance During the Aluminum Forming ProcessDurability of perfluoropolyether nanolubricant film fixed on diamond-like carbon surfacesRolling and rolling-to-sliding contact behaviour of DLC coatingsSession VII: TransmissionsA Full Toroidal Traction Drive IVT for Automotive Volume ProductionEffects of the Maximum Hertzian Pressure on the Maximum Traction Coefficient Under EHL ConditionsStructure and mechanical property of boundary lubricating film formed in belt-type CVT oilEfficiency modelling in the full toroidal variator: Investigation into optimisation of EHL contact conditions to maximize contact efficiency.Session VIII: TribochemistryTribochemical approach toward mechanism for synergism of lubricant additives on antiwear and friction reducing propertiesTribochemistry of mono molecular additive films on metal surfaces, investigated by XPS and HFRRWater-accelerated chemical reaction for producing gear teeth with high form accuracy and fine surface finishSession IX: Condition MonitoringCondition Monitoring as a Tool to Aid Compliance with ISO 14000Evaluation of an Ultrasonic Method for Measurement of Oil Film Thickness in a Hydraulic Motor Piston RingUltrasonic Reflection from Mixed Liquid-Solid Contacts and the Determination of Interface StiffnessSession X: Rolling Contact FatigueExtended finite element method for numerical simulation of 3D fatigue crack growthA mixed mode fatigue crack model with the coupled X-FEM/LATIN method. Application to rolling contact fatigue (RCF)Study on Rolling Contact Fatigue in Hydrogen Atmosphere - Improvement of Rolling Contact Fatigue Life by Formation of Surface Film -Rolling Contact Fatigue Life of Bearing Steel Rollers Lubricated with Low Viscosity Traction OilSession XI: Bio-Tribology 2Diatom BiotribologyFriction of Contact Lenses: Silicone Hydrogel versus Conventional HydrogelModelling the blood flow in an aorta; the MPTT and Modified MPTT models.A novel technique for evaluation of articular cartilage lubrication based on the surface plasmon resonanceSession XII: Coatings 2The Effect of Si Content and Substrate Bias on Structural and Tribological Properties of (Cr,Si)N Coatings under Water LubricationTribological characteristics of WC1-x, W2C and WC tungsten carbide filmsSession XIII: Lubricants 2Power Loss in FZG gears lubricated with industrial gear oils: Biodegradable Ester vs. Mineral oilThe effect of dissolved ions on tribological properties in waterComparative Theoretical and Experimental Study of Linear and Star Polymer Additive Degradation in Kurt Orbahn TestsSession XIV: Bio-degradability - SustainabilitySustainable Development Thinking in Tribology DesignSliding experiments of steels in gaseous hydrogenEcological-friendly Oil Film on Water Fog Metalworking FluidLubrication in Refrigeration Systems: Performance of Journal Bearings Lubricated with Oil and Refrigerant MixturesSession XV: Machine Systems 1Modern Tribology in Life Cyele AssessmentAn experimental study on the friction behaviour of aircraft hydraulic actuator elastomeric reciprocating sealsExperimental Study on Gas Transportation in Radial Shaft SealsFriction coefficient between gear teeth in mixed film lubricationSession XVI: Contact Mechanics, Wear and FailureAnalytical Studies of Contact Problems for Fractal SurfacesA model of seizure based on Burwell and Strang's concept of wear mode transitionAn Asperity Based Model for Wear Rate in Mixed LubricationSession XVII: Automotive 1Lubricants & Energy Efficiency: Life-Cycle AnalysisStarved Hydrodynamic Lubrication of the Piston Ring Cylinder Liner Contact: Preliminary Study of the Influence of Surface TexturingA Model for Diesel Fuel Additive LubricityThe Degradation of Lubricants in Gasoline Engines: Development of a Test Procedure to Evaluate Engine Oil Degradation and its Consequences for RheologySession XVIII: Elastohydrodynamic Lubrication 2Surface contact and damage in micro-EHLThe Transient Elastohydrodynamic Friction Analysis of Main BearingsNumerical analysis of the thermal micro-EHL problem of point contact with a single surface bumpRoughness Amplitude Reduction under Non-Newtonian EHD Lubrication ConditionsSession XIX: Coatings 3Sliding wear of oxygen diffusion hardened Ti-6A1–4V in physiological salineHard coatings durability under fretting wearThe effect of the crystallographic orientation of Ag thin films on their tribologieal performanceThe Effect of Sliding History on the Steady State Friction Coefficient between CNX Coatings under N2 LubricationSession XX: Wear and Debris EffectsThe Life Cycle of a Debris ParticleExperimental investigations of Rolling Contact Fatigue of dented surfaces using artificial defectsStability, Wear, and Corrosion Characteristics of Rapidly Solidified High Temperature AI-8Fe-4Ce AlloyPredicting the growth of RCF crack with the use of the 3D multi size finite element model.Session XXI: BearingsIntegrated Tribological Analysis within a Multi- physics Approach to System DynamicsTribological performance of selected bearings and bearing materials used for nanopositioningInfluence of Manufacturing Error of Roundness for Characteristics of Cylindrical Journal BearingSession XXII: Automative 2Additive/additive interactions in boundary lubrication — a study of film formation and tenacityFundamental Study of Changes in Friction and Wear Characteristics due to ZnDTP Deterioration in Simulating Engine Oil Degradation during Use (Part 2) -- Influences of the Presence of Peroxide and Dispersed Zn-containing Solids--The Degradation of Lubricants in Gasoline Engines: Lubricant Flow and Degradation in the Piston AssemblySession XXIII: Machine Systems 2Seizure Tests to Select Materials for Cylinder Blocks and Valve Plates in Water Hydraulic PumpsA reduced-scale testing machine for tribological evaluation of brake materialsExperimental-Numerical Friction Factor DeterminationSession XXIV: Nanotribology 2Effects of Ultra-Violet Irradiation on Conformation and Spreading Characteristics of Molecularly Thin Lubricant FilmsFriction and wear life evaluation of silane based self assembled monolayers on silicon surfaceBasic Observations of Tribological Phenomena by Neutron Scattering MethodsSession XXV: Bio-tribology 3The Importance of Protein Physisorption in BioMEMS/NEMS Applications: A Nanotribological StudyMetal-metal cervical disc implants: A material investigation using pin-on-plate testsWritten DiscussionList of Delegates