Computational and Experimental Simulations in Engineering

Nyhet

Proceedings of ICCES 2025, Volume 2

Inbunden, Engelska, 2026

5 199 kr

Kommande

This book gathers the latest advances, innovations, and applications in the field of computational engineering, as presented by leading international researchers and engineers at the 31st International Conference on Computational & Experimental Engineering and Sciences (ICCES), held in Changsha, China, on May 25–29, 2025. ICCES covers all aspects of applied sciences and engineering: theoretical, analytical, computational, and experimental studies and solutions of problems in the physical, chemical, biological, mechanical, electrical, and mathematical sciences. As such, this book discusses highly diverse topics, including composites; bioengineering and biomechanics; geotechnical engineering; offshore and arctic engineering; multi-scale and multi-physics fluid engineering; structural integrity and longevity; materials design and simulation; computer modeling methods in engineering. The contributions, which were selected by means of a rigorous international peer-review process, highlight numerous exciting ideas that will spur novel research directions and foster multidisciplinary collaborations.

Produktinformation

Utgivningsdatum2026-02-12
Mått155 x 235 x undefined mm
FormatInbunden
SpråkEngelska
SerieMechanisms and Machine Science
FörlagSpringer Nature Switzerland AG
ISBN9783032111647

Tillhör följande kategorier

Numerical Study of Drag Reduction and Thermal Protection Performance in a Combined Opposing Jet-Aerospike Configuration.- Cross-View Image Geo-Localization Based on the Integration of Overhead-View Feature Synthesis and MixVPR.- Numerical Study on Flow Characteristics of Positive and Reverse Spiral V-Shaped Tools in Horizontal Well.- Intelligent Component Layout Design of Steel Frame-Braced Structures Using Diffusion Models.- Development and Application of Intelligent Robot Equipment for Stone Floor Paving Based on Process Data and Visual Identity Algorithms,- Modal and Harmonic Response Analysis of Connecting Rods Fabricated from Different Materials.- In-Depth Research on Descriptive Vector Statics and Exploration of Its Applications.- A Machine Vision-Based Method for Welding Defect Detection.- Application Reliability Analysis of Typical Domestic Industrial Components.- Energy-Saving Optimization Method for New Infrastructure Cold Source Equipment Room.- A Programmable Bilayer Shape Memory Polymer Composite for Soft Bending Actuators.- Influence Mechanism of Silicon Anode Particle Size and Charging Rate on the Mechanical and Chemical Behavior of Li-Ion Batteries.- Research on Visual Inspection of Cable Lines Based on Infrared Thermography Technology.- Day-Ahead Operation Optimization for a Hydrogen Production System Based on the Start-Stop Characteristics of PEM Electrolyers.- Experimental Study on the Hydraulic Conductivity of Longdong Chang7 Tight Sandstone.- Integrated Geomechanical Characteristics Mapping Based on Mechanical Earth Model: A Case Study for H Oilfield in the Middle East.- Technical Progress of Electric Control Flow Control Valve.- The Dual Effect of Pullulan on Methane Gas Hydrate Formation.- Numerical Simulation Study of Casing Eccentricity Effects on Cementing Quality in Enlarged Wellbore Sections.- Analysis of Influencing Factors of Hydrate Plugging Time in Gas-Dominated System: Experiment and Mechanism.- Study on the Influence of Low-Temperature Drilling Fluid Invasion on the Mechanical Properties of Hydrate-Bearing Sediments.- Friction Analysis and Application of Putting Same Well Synchronous Injection-Production String Down in Horizontal Well.- Dynamic Evolution of Pore Structures in Kerogen During the Maturation of Shale Formations: Pore Generating, Connecting, and Percolating.- Predicting Sand Production in High Temperature, High Pressure, Ultra Deep Formations of the Junggar Southern Margin.- Energy Extraction Through an Intermodular Approach by Utilizing a Turbocharger for Small-Scale Thrust Applications.- Study on Damage Accumulation of Soil Slopes Under Water Level Variation Conditions Using Centrifuge Modelling.- Study of the Temperature Field and Microstructure in the Titanium Alloy Additive Manufacturing Process.- High-Precision and Efficient Modeling and Computational Strategies for Large-Scale Lattice Structures in Mechanical Metamaterials.- Wellbore Stability Analysis of Horizontal Wells Drilled in Hydrate-Bearing Reservoirs.- Fluid Simulation Analysis of the Electric-Controlled Downhole Flow Control Valve.- Effect of Porosity on the Indentation Response of Polycrystalline Porous Sintered Silver.- Corrosion Failure Behavior and Mechanism of Calcium Magnesium Aluminum Silicon Deposits in Yttrium Monosilicate Environmental Barrier Coating System at.- Microstructure and Properties of Martensitic Steel Remanufactured Part.- Research on Testing Method for Surface Catalytic Coefficient of Thermal Protection Materials Based on Inductively Coupled Plasma Wind Tunnel.- In Situ Characterization of Cracking Behavior of SiCf/SiC Composite Using Digital Image Correlation.- Numerical Investigation into the Dynamics of Ti-6Al-4V Alloy Molten Pool by Annular Laser Beam.- Mechanical Characteristics and Structural Optimization of Wind Turbine Blades Based on Fluid-Structure Interaction.- Collision Cushioning Response of CNT/Graphene Composite Foam.- Co-Simulation Analysis of Structural Dynamic Response in Carrier-Based Aircraft Catapult Launch.- A Novel Identification Method for Torsional Stiffness Coefficient Based on Laser Pulse.- FEM Simulation of Swelling Deformation Behavior of Hydrogel in Unsteady State.- Surface Elasticity-Enabled Micromechanics Model for Multiscale Hierarchical Composites with Complex Mesoscale Configuration Feature.- Microstructural and Stiffness Evolution of Clay Sediment Under Compression studied by 2D DEM.- Pipe Surface Modification for Enhancing Gas Pipeline Flow Efficiency.- Fracturing Induced Fault Slip and Wellbore Rock Mass Deformation Analysis Based on Cohesive Element Modeling.- A Triply Periodic Minimal Surface Heat Sink Design for High Power Chips.- Development History and Trend of Intelligent Drilling Technology and Equipment.- Study on the Mechanism of Trajectory Control for Low-Permeability Coal Seam.- Research on Liner Running Limit and Influence Rule Considering the Effect of Wellbore Enlargement.- Study on Prediction of Casing Running Mechanical Drag Considering Borehole Irregularity.- Prediction of Casing Running Mechanical Drag Based on Finite Element Simulation Under Complex Working Conditions.- Risk Prediction Method of Drill String Fatigue Failure Considering Vibration Characteristics in Deep and Ultra-Deep Well Operation.- Study on Calculation Method of Shear Capacity of Joints in Prefabricated Segmental Assembled Bridge.- Implementation of a User-Defined XFEM Based Nonlocal Averaging Method in Abaqus.- Numerical Investigation on the Cooling Performances of an Innovative Double Layer Combined Cooling Design.- Phase-Field Modelling of Fracture in Viscoelastic Polymers and Experimental Parameter Identification.- Effects of Stress Ratio on Fatigue Property of Additively Manufactured Ti6Al4V Organic Lattice Materials.- Natural Scene Text Recognition Integrated with DeepSeek Error Correction.- Study on the Optimization of Drilling Tool Parameters for the Vertical Drilling System in Block X of Xinjiang.- Numerical Stimulation of Irregular Propagation of Hydraulic Fracture Considering Fractal Characteristics of Fracture Surface.- Identification of Nonlinear Unsteady Aerodynamic Loads Based on Fourier Neural Operator.- Heterogeneous Entity Matching Based on Attribute Fine-Grained Perception.- Pre-tensioning Effect on Fatigue Life of Bolt Connection of Marine Heterogeneous Structures.- Data-Driven Surrogate Modeling for Macroscale Volume Growth Prediction of CERCER Composite Fuels: A Comparative Study of RNN, LSTM and Transformer.- Development and Performance Analysis of Intelligent Temperature-Control Drilling Fluids for Deepwater Hydrate-Bearing Formations.- Analysis of Creep Behavior in Deepwater Shallow Soils and Wellbore Stability.- Approximation and Inverse Design of Microwave Absorption for QF/EP@FexCo1-x Laminated Composites Based on Data-Driven Predictive Model and Bayesian.- Optimization Design of Porous Structure Support for Hydrogen Tank in Hydrogen-Powered UAVs.- Study on the Evolution Laws and Prediction of Surface Roughness of Metal Surfaces During Laser Polishing.- Fracture Modeling in Fiber-Reinforced Composite Material by Variational Damage Model.- Preparation of Strain Sensors Based on Multi-Walled Carbon Nanotubes and Their Application in Soft Bending Actuator.- Optimization Method of Steel-Braced Frame Structures Based on Deep Reinforcement Learning.- Cooperative Guidance via Improved Newton-Type Trajectory Optimization Method for Near-Space Vehicles.- Utilization of Robust Mean-Difference Filtering for Relative Positioning of Formation Spacecraft in Navigation.- Two-Dimensional Pluvial Evaluation Using S-Band Weather Radar Rainfall Ensemble Nowcasting for National Grid Facilities.- Effects of the Shape of Ventilation Devices on Air Layer Drag Reduction for Underwater Axisymmetric Vehicles.- A Piecewise-Exponential Model for Functionally Graded Piezoelectric Materials with an Angle Crack.- Numerical Study on the Self Re-Sealing Ability of Magnetic Fluid Bridges.- Study on the Copper Filling for Nanoscale Through-Silicon Vias.- A Topology-Enhanced Physics-Informed Graph Neural Network Framework for Elastic Problems in Heterogeneous Materials.- Optimization of Key Parameters for Jet Drilling in Ultra-Deep Water Shallow Formation Based on Intelligent Algorithm.- An Innovative Method for Calculating Fractured Formation Loss Pressure Based on Breathing Effect.- Numerical Study on Wellbore Temperature Under the Co-Existence of Kick and Loss in Ultra-Deep & High-Temperature Wells.- User Stance Prediction Model Integrating Historical Topics and Stance Volatility Traits.- A Mamba Model Based on Discrete Wavelet Decomposition and Max-Dilated Convolution for State of Health Estimation of Lithium-Ion Batteries.- A Review: Advanced Buoyancy Control Systems for Submersible Underwater Vehicles.- Effects of Shock Wave Dynamic Pressure on Aircraft Transient Pressure Distribution Characteristics.- Prediction of Drill Cuttings Settling Velocity in Deep Well via Machine Learning Algorithms.- Federated Learning Vehicle Terminal Selection Method Based on Vehicle Service Capability in Internet of Vehicles.- Motion Optimization for Dual-Robot Collaborative Placement in the Manufacturing of Complex Composite Rotary Components.- Analysis of Thermo-Dynamic Characteristics of Sandwich Cylindrical Shell with Elastic-Metallic Wire Mesh Core.- Triaxial Mechanics Simulation Experiment of Hydrate Formation.- Influence of Sleeper Structure on the Behaviour of Flow Developed Underneath a High-Speed Train.- Load Characteristics of Near-Breach Bubbles Based on Smoothed Particle Hydrodynamics.- Design of Xinglian Road Xiangjiang River Bridge: A 380m-Span Composite Girder Cable-Stayed Bridge.