State of the Art and Future Trends in Materials Modelling 2

Holm Altenbach is a member of the International Research Center on Mathematics and Mechanics of Complex Systems (M&MoCS), Italy, and International Association of Applied Mathematics and Mechanics (GAMM). In 1996, he was appointed as a full professor (Engineering Mechanics) at the Martin Luther University Halle-Wittenberg, and since 2011, he has been a full professor at the Otto von Guericke University Magdeburg. He graduated from Leningrad Polytechnic Institute in 1980 (diploma with a distinction), defended his Ph.D. and obtained his postgraduate degree (habilitation) from the same university in 1983 and 1987, respectively. His areas of scientific interest are theory of plates and shells with applications, continuum mechanics and material modeling, generalized media, sandwiches and laminates. He is an Editor-in-Chief of the Journal of Applied Mathematics and Mechanics/Zeitschrift für Angewandte Mathematik und Mechanik (the oldest journal in mechanics in Germany) and of Springer’s Advanced Structured Materials series. He is a member of the editorial board of several journals: among them Continuum Mechanics and Thermodynamics, Technische Mechanik, Mechanics of Composite Materials, and Journal of Strain Analysis for Engineering Design. He was awarded the Polish Humboldt Prize in 2018. In November 2019, he was elected as a Foreign Member of the Russian Academy of Sciences and in May 2021 as a Foreign Member of the National Academy of Sciences of Ukraine. Since October 1st, 2022, he is retired. In 2024 he was awarded the Lomonosov Gold Medal of the RAS.Andreas Öchsner is a full professor of Lightweight Design and Structural Simulation at Esslingen University of Applied Sciences, Germany. After completing his Dipl.-Ing. degree in Aeronautical Engineering at the University of Stuttgart (1997), he served as a research and teaching assistant at the University of Erlangen-Nuremberg from 1997 to 2003 while pursuing his Doctor of Engineering Sciences (Dr.-Ing.) degree. From 2003 to 2006, he was an assistant professor at the Department of Mechanical Engineering and the head of the Cellular Metals Group affiliated with the University of Aveiro, Portugal. He spent seven years (2007–2013) as a full professor at the Department of Applied Mechanics, Technical University of Malaysia, where he was also the head of the Advanced Materials and Structure Lab. From 2014 to 2017, he was a full professor at the School of Engineering, Griffith University, Australia.

• Preface.- 1 Damage Behavior in Additive Manufacturing based on Infill Pattern and Density with Carbon Particle Filled PolyLactic Acid (CF-PLA) Polymer Filaments.- 2 Advanced Mathematical Modeling of Moisture Transport in Polymer Composite Materials: State-of-the-Art and Numerical Computation.- 3 Natural Vibration and Stability of Prestressed Cylindrical Shells Containing Fluid.- 4 Creep and Fretting Wear Modelling for Rod-Cylinder Periodical Contacts.- 5 Influence of UV Irradiation on the Tensile Properties of Titanium Dioxide Composites for the Selective Laser Sintering Process.- 6 Ellipticity and Hyperbolicity Within Nonlinear Strain Gradient Elasticity: 1D Case.- 7 Dispersive and Dissipative Effects During the Propagation of Plane Shear Waves in Plates which Interact with Linear Elastic and Nonlinear Elastic Foundations.- 8 Effective Properties of Micropolar Laminated Media Under the Influence of Constitutive Property Rotation.- 9 Torsion of Non-Circular Functionally Graded Material Shafts.- 10 Biaxial Specimens for the Analysis of Ductile Damage and Fracture in Sheet Metals.- 11 Drying Mathematical Modeling of Clay Materials: State-of-the-Art Review and Engineering Applications.- 12 Contact Problem for a Piecewise Homogeneous Plane with a Finite Crack Under the Static Friction.- 13 Prediction of Static Macroscopic Material Behaviour of Additively Manufactured Metals through Crystal Plasticity Modelling.- 14 Phase Field Approach for Damage in Quasi-Brittle Polycrystalline Microstructures.- 15 Optimization of Welding Parameters on Friction Stir Welding of AA5052 Thin Plate by Using Taguchi Method.- 16 Hierarchical Models for the Thermoelastic Deformation of Chiral Porous Prismatic Shells.- 17 Energy Equivalence Based Estimation of Composite Materials Mechanical Properties.- 18 Advanced Materials Modelling in Joining by Plastic Deformation.- 19 Modeling the Accumulation of Damage in the Alloy IN738LC.- 20 Rotationally Symmetric Limit Surface for Hard Isotropic Foams.- 21 Considerations About Classical and Weak Solutions in a Thermoelastic Cosserat Body with Voids.- 22 Localized Modes of Anti-Plane Shear Vibrations of an Elastic Ultrathin Layer with a Free Upper Face Having Imperfections.- 23 Modelling the Elasto-Plastic Material Behavior of Textured Hexagonal Close-Packed Metals.- 24 Analysis on Fatigue Life of Mixing Tee Weldments Subjected to Dynamic Loadings in Piping Systems.- 25 Attraction Basins and Longitudinal Resonances in the Generalized Kapitsa Problem for the Inflexible Longitudinally Deformable Rod.- 26 Generation of Bending Waves in a Mass-in-Mass Metamaterial.- 27 Thermoelasto-Plastic Modeling of Structural Steel: A Parameter Study on Residual Stress Concentrations in Ribbed Reinforcing Bars.- 28 Contact of the Stamp with an Elastic Half-Plane. Comparative Analysis of Models Accounting for Friction Between Them.- 29 Thermomechanical Properties of 3D-Printed Structures.- 30 A Direct and High-Efficiency Approach to Accurately Simulating Overall Bending Responses of Ultra-High Performance Fiber-Reinforced Concrete Beams up to Failure.