Adhesive Bonding in Five Steps

Achieving Safe and High-Quality Bonds

Inbunden, Engelska, 2022

3 049 kr

Beställningsvara. Skickas inom 3-6 vardagar. Fri frakt för medlemmar vid köp för minst 249 kr.

Adhesive Bonding in Five StepsAdhesive bonding is a low-heat joining technique and capable of joining virtually all technically usable materials together in a two-dimensional manner. The bond created by an adhesive is built up very gently, since the bonding process requires neither high heat – as with welding or soldering – nor structurally weakening holes – as with riveting or screwing. Since the bond is usually applied over a large area, it also ensures a relatively uniform stress distribution in the component.Using a clearly structured 5-step management system, this book provides detailed instructions for the steps required to set up a stable process for producing a safe and high-quality bonded component. The focus is on the treatment of the material surfaces to be bonded, the selection of suitable adhesives, the dimensioning of the bond, and the process steps for metering/mixing and curing the adhesives.The user is thus presented with sustainable materials as well as modern bonding processes. Here, the special focus is on the suitable methods for surface treatment of the substrates, the adhesives to be used and the processing methods to be employed relevant for the manufacture of bonded components in industry and trade.

Produktinformation

Utgivningsdatum2022-02-23
Mått170 x 244 x 24 mm
Vikt907 g
FormatInbunden
SpråkEngelska
Antal sidor400
FörlagWiley-VCH Verlag GmbH
ISBN9783527349142

Tillhör följande kategorier

Jürgen Klingen studied chemistry at the University of Duisburg/Germany, and received his doctorate from Prof. Robert Gillard at the University of Wales (Department Applied Chemistry) in the field of crosslinking of polyisoprene-based adhesives. For more than 35 years he held various positions in research, development and application engineering for the company 3M Deutschland GmbH, one year in corporate research in St. Paul/Minnesota, USA, where he worked on new high-performance adhesive systems for the European market. He received the 3M Corporate Circle of Technical Excellence Award for his research in this area. From 1996 to 2017, Dr. Klingen headed 3M’s European Corporate Materials and Process Laboratory in Neuss, Germany, where he was responsible for technology development of new adhesives, tapes, films, coatings and polymer processing for Europe. Since the end of 2017, he has been working as a consultant for the development of bonding processes in industry and trade. Dr. Klingen is co-author of two technical books and sole author of one technical book as well as holder of several patents in the field of adhesive bonding technology.

Mer från samma författare

Klebtechnik

Walter Brockmann, Paul Ludwig Geiß, Jürgen Klingen, K. Bernhard Schröder

Inbunden

2 659 kr

Adhesive Bonding

Walter Brockmann, Paul Ludwig Geiß, Jürgen Klingen, K. Bernhard Schröder, Germany) Brockmann, Walter (Technical University Kaiserslautern, AWOK, Kaiserslautern, Germany) Geiß, Paul Ludwig (Technical University Kaiserslautern, AWOK, Kaiserslautern, Germany) Klingen, Jurgen (3M Deutschland GmbH, Neuss, Ge) Schroder, K. Bernhard (University of Tubingen, Reutlingen, Paul Ludwig Gei?, Jurgen Klingen, Schr

Inbunden

3 059 kr